620 Ingenieurwissenschaften und Maschinenbau
Refine
Year of publication
- 2021 (3) (remove)
Document Type
- Article (2)
- Conference Proceeding (1)
Has Fulltext
- yes (3)
Is part of the Bibliography
- yes (3)
Institute
In this experimental work, the quasi static and fatigue properties of a 40 wt.% long carbon fiber reinforced partially aromatic polyamide (Grivory GCL-4H) were investigated. For this purpose, microstructural parameter variations in the form of different thicknesses and different removal directions from injectionmolded plates were evaluated. Mechanical properties decreased by increasing misalignment away from the melt flow direction. By changing the specimen thickness, no change in the general fiber distribution pattern transversal and normal to the axis of melt flow was observed. It has shown that with increasing specimen thickness the quasi static properties along the melt flow direction decreased and vice versa resulting in superior properties normal to the melt flow axis. At around 5 mm, an intersection suggests quasi-isotropic behavior. In addition, the fatigue strength of the material was significantly higher in the flow direction than normal to the flow direction. No change in fatigue life was observed while changing specimen thickness. The Basquin equation seems to describe the effect of stress amplitude on the fatigue strength of this composite. Scanning electron microscopy was used to investigate fracture surfaces of tested specimens. Results show that mechanical properties and morphological structures depend highly on fiber orientation.
In dieser Arbeit wird untersucht, wie sich ein steigender energetischer Autarkiegrad eines speziellen containerbasierten Einfamilienhauses auf verschiedene ökologische Indikatoren auswirkt. Zur Steigerung des Autarkiegrades wurden folgende Komponenten verbaut und variiert: Photovoltaik (PV) mit und ohne Batteriespeicher sowie Vakuum-Isolations-Paneelen (VIP) und Phasenwechselmaterialien (PCM) in der Gebäudehülle. Bei der Betrachtung der Umweltbelastungen stehen dabei die folgenden Lebenswegphasen im Vordergrund: Herstellung, Nutzung und Verwertung. Das Recycling Potenzial spielt hier eine untergeordnete Rolle. Nach der Definition des Gebäudes und der Ermittlung der Wärme und Strombedarfswerte werden die Ergebnisse für die verschiedenen Umweltindikatoren einzeln errechnet. Das Treibhauspotenzial (GWP), Versauerungspotenzial (AP) und der abiotische Ressourcenverbrauch werden in Abhängigkeit vom Autarkiegrad dargestellt. Die Ergebnisse zeigen, dass die ökologisch günstigste Lösung je nach Umweltindikator sehr unterschiedlich ausgeprägt ist und zwischen 0 bis 75 % Autarkiegrad liegt. Abschließend findet eine kurze ökonomische Betrachtung statt.