Fakultät IuI
Refine
Year of publication
- 2021 (3) (remove)
Document Type
- Article (3) (remove)
Language
- English (3)
Is part of the Bibliography
- yes (3)
Institute
- Fakultät IuI (3)
In this experimental work, the quasi static and fatigue properties of a 40 wt.% long carbon fiber reinforced partially aromatic polyamide (Grivory GCL-4H) were investigated. For this purpose, microstructural parameter variations in the form of different thicknesses and different removal directions from injectionmolded plates were evaluated. Mechanical properties decreased by increasing misalignment away from the melt flow direction. By changing the specimen thickness, no change in the general fiber distribution pattern transversal and normal to the axis of melt flow was observed. It has shown that with increasing specimen thickness the quasi static properties along the melt flow direction decreased and vice versa resulting in superior properties normal to the melt flow axis. At around 5 mm, an intersection suggests quasi-isotropic behavior. In addition, the fatigue strength of the material was significantly higher in the flow direction than normal to the flow direction. No change in fatigue life was observed while changing specimen thickness. The Basquin equation seems to describe the effect of stress amplitude on the fatigue strength of this composite. Scanning electron microscopy was used to investigate fracture surfaces of tested specimens. Results show that mechanical properties and morphological structures depend highly on fiber orientation.
The effects of reaction parameters on Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0001 production from ethanol photocatalysis in the gas phase have been investigated. The photocatalytic activity evolves from an early mass‐transfer limited regime to an independent one at later irradiation times, which is interpreted in terms of a photocatalytic site activity distribution. Ethanol molar fraction exhibits two different domains, with Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0002 production increasing up to a molar fraction of 0.12, beyond which it plateaus. Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0003 :AcH ratios are very sensitive to reaction conditions, reaching 1.8 at low reactant flows. UV light is converted to Hurn:x-wiley:23670932:media:cptc202000216:cptc202000216-math-0004 with an efficiency of nearly 3 %.