Fakultät IuI
Refine
Year of publication
Document Type
- Conference Proceeding (42)
- Article (13)
- Working Paper (2)
- Part of Periodical (1)
Language
- English (58) (remove)
Is part of the Bibliography
- yes (58)
Keywords
- Gazebo (2)
- LiDAR (2)
- Materialermüdung (2)
- Power Consumption (2)
- Robot operating system (ROS) (2)
- Simulation and Modeling (2)
- biogas (2)
- lab on a chip (2)
- mobile field laboratory (2)
- soil nutrients analysis (2)
Institute
This paper investigates four different mobile robots with respect to their drivingcharacteristics and soil preservation properties in an agricultural environment.Thereby, robots of classical design from agriculture as well as systems from spacerobotics with advanced locomotion concepts are considered to determine theindividual advantages of each rover concept with respect to the application domain.Locomotion experiments were conducted to analyze the general driving behavior,tensile force, and obstacle‐surmounting capability and ground interaction of eachrobot. Various soil conditions typical for the area of application are taken intoaccount, which are varied in terms of moisture and density. The presented workcovers the specification of the conducted experiments, documentation of theimplementation as well as analysis and evaluation of the collected data. In theevaluation, particular attention is paid to the change in driving characteristics underdifferent soil conditions, as well as to the soil stress caused by driving, since soilquality is of critical importance for agricultural applications. The analysis shows thatthe advanced locomotion concepts, as used in space robotics, also have positiveimplications for certain requirements in agricultural applications, such as maneuver-ability in wet conditions and soil conservation. The results show potential for designinnovations in agricultural robotics that can be used, to open up new fields ofapplication for instance in the context of precision farming.
The usage of high-level synthesis (HLS) tools for FPGAs has increased significantly over the last years since they matured and allow software programmers to take advantage of reconfigurable hardware technology.
Most HLS tools employ methods to optimize for loops, e. g. by unrolling or pipelining them. But there is hardly any work on the optimization of while loops. This comes at no surprise since most while loops have loop-carried dependences involving the loop condition which result in large recurrence cycles in the dataflow graphs. Therefore typical while loops cannot be parallelized or pipelined.
We propose a novel transformation which allows to optimize while loops nested within a for loop. By interchanging the two loops, it is possible to pipeline (and thereby parallelize) the inner loop, resulting in a reduced execution time. We present two case studies on different hardware platforms and show the speedup factors - compared to a host processor and to an unoptimized hardware implementation - achieved by our while loop optimization method.
Artificial intelligence (AI) promises transformative impacts on society, industry, and agriculture, while being heavily reliant on diverse, quality data. The resource-intensive "data
problem" has initialized a shift to synthetic data. One downside of synthetic data is known as the "reality gap", a lack of realism. Hybrid data, combining synthetic and real data, addresses this. The paper examines terminological inconsistencies and proposes a unified taxonomy for real, synthetic, augmented, and hybrid data. It aims to enhance AI training datasets in smart agriculture, addressing the challenges in the agricultural data landscape. Utilizing hybrid data in AI models offers improved prediction performance and adaptability.
This paper presents an optimized algorithm for estimating static and dynamic gait parameters. We use a marker- and contact-less motion capture system that identifies 20 joints of a person walking along a corridor.
Based on the proposed gait cycle detection basic metrics as walking frequency, step/stride length, and support phases are estimated automatically. Applying a rigid body model, we are capable to calculate static and dynamic gait stability metrics. We conclude with initial results of a clinical study evaluating orthopaedic technical support.
he development of context-aware applications is a difficult and error-prone task. The dynamics of the environmental context combined with the complexity of the applications poses a vast number of possibilities for mistakes during the creation of new applications. Therefore it is important to test applications before they are deployed in a life system. For this reason, this paper proposes a testing tool, which will allow for automatic generation of various test cases from application description documents. Semantic annotations are used to create specific test data for context-aware applications. A test case reduction methodology based on test case diversity investigations ensures scalability of the proposed automated testing approach.
In this experimental work, the quasi static and fatigue properties of a 40 wt.% long carbon fiber reinforced partially aromatic polyamide (Grivory GCL-4H) were investigated. For this purpose, microstructural parameter variations in the form of different thicknesses and different removal directions from injectionmolded plates were evaluated. Mechanical properties decreased by increasing misalignment away from the melt flow direction. By changing the specimen thickness, no change in the general fiber distribution pattern transversal and normal to the axis of melt flow was observed. It has shown that with increasing specimen thickness the quasi static properties along the melt flow direction decreased and vice versa resulting in superior properties normal to the melt flow axis. At around 5 mm, an intersection suggests quasi-isotropic behavior. In addition, the fatigue strength of the material was significantly higher in the flow direction than normal to the flow direction. No change in fatigue life was observed while changing specimen thickness. The Basquin equation seems to describe the effect of stress amplitude on the fatigue strength of this composite. Scanning electron microscopy was used to investigate fracture surfaces of tested specimens. Results show that mechanical properties and morphological structures depend highly on fiber orientation.
Artificial intelligence (AI) and human-machine interaction (HMI) are two keywords that usually do not fit embedded applications. Within the steps needed before applying AI to solve a specific task, HMI is usually missing during the AI architecture design and the training of an AI model. The human-in-the-loop concept is prevalent in all other steps of developing AI, from data analysis via data selection and cleaning to performance evaluation. During AI architecture design, HMI can immediately highlight unproductive layers of the architecture so that lightweight network architecture for embedded applications can be created easily. We show that by using this HMI, users can instantly distinguish which AI architecture should be trained and evaluated first since a high accuracy on the task could be expected. This approach reduces the resources needed for AI development by avoiding training and evaluating AI architectures with unproductive layers and leads to lightweight AI architectures. These resulting lightweight AI architectures will enable HMI while running the AI on an edge device. By enabling HMI during an AI uses inference, we will introduce the AI-in-the-loop concept that combines AI's and humans' strengths. In our AI-in-the-loop approach, the AI remains the working horse and primarily solves the task. If the AI is unsure whether its inference solves the task correctly, it asks the user to use an appropriate HMI. Consequently, AI will become available in many applications soon since HMI will make AI more reliable and explainable.
In modern times, closed-loop control systems (CLCSs) play a prominent role in a wide application range, from production machinery via automated vehicles to robots. CLCSs actively manipulate the actual values of a process to match predetermined setpoints, typically in real time and with remarkable precision. However, the development, modeling, tuning, and optimization of CLCSs barely exploit the potential of artificial intelligence (AI). This paper explores novel opportunities and research directions in CLCS engineering, presenting potential designs and methodologies incorporating AI. Combining these opportunities and directions makes it evident that employing AI in developing and implementing CLCSs is indeed feasible. Integrating AI into CLCS development or AI directly within CLCSs can lead to a significant improvement in stakeholder confidence. Integrating AI in CLCSs raises the question: How can AI in CLCSs be trusted so that its promising capabilities can be used safely? One does not trust AI in CLCSs due to its unknowable nature caused by its extensive set of parameters that defy complete testing. Consequently, developers working on AI-based CLCSs must be able to rate the impact of the trainable parameters on the system accurately. By following this path, this paper highlights two key aspects as essential research directions towards safe AI-based CLCSs: (I) the identification and elimination of unproductive layers in artificial neural networks (ANNs) for reducing the number of trainable parameters without influencing the overall outcome, and (II) the utilization of the solution space of an ANN to define the safety-critical scenarios of an AI-based CLCS.
While developing traffic-based cognitive enhancement technology (CET), such as bike accident prevention systems, it can be challenging to test and evaluate them properly. After all, the real-world scenario could endanger the subjects’ health and safety. Therefore, a simulator is needed, preferably one that is realistic yet low cost. This paper introduces a way to use the video game Grand Theft Auto V (GTA V) and its sophisticated traffic system as a base to create such a simulator, allowing for the safe and realistic testing of dangerous traffic situations involving cyclists, cars, and trucks. The open world of GTA V, which can be explored on foot and via various vehicles, serves as an immersive stand-in for the real world. Custom modification scripts of the game give the researchers control over the experiment scenario and the output data to be evaluated. An off-the-shelf bicycle equipped with three sensors serves as a realistic input device for the subject’s movement direction and speed. The simulator was used to test two early-stage CET concepts enabling cyclists to sense dangerous traffic situations, such as trucks approaching from behind the cyclist. Thus, this paper also presents the user evaluation of the cycling simulator and the CET used by the subjects to sense dangerous traffic situations. With the knowledge of the first iteration of the user-centered design (UCD) process, this paper concludes by naming improvements for the cycling simulator and discussing further research directions for CET that enable users to sense dangerous situations better.