Refine
Year of publication
Document Type
- Conference Proceeding (42)
- Article (13)
- Working Paper (2)
- Part of Periodical (1)
Language
- English (58) (remove)
Is part of the Bibliography
- yes (58)
Keywords
- Gazebo (2)
- LiDAR (2)
- Materialermüdung (2)
- Power Consumption (2)
- Robot operating system (ROS) (2)
- Simulation and Modeling (2)
- biogas (2)
- lab on a chip (2)
- mobile field laboratory (2)
- soil nutrients analysis (2)
Institute
- Fakultät IuI (58) (remove)
This paper investigates four different mobile robots with respect to their drivingcharacteristics and soil preservation properties in an agricultural environment.Thereby, robots of classical design from agriculture as well as systems from spacerobotics with advanced locomotion concepts are considered to determine theindividual advantages of each rover concept with respect to the application domain.Locomotion experiments were conducted to analyze the general driving behavior,tensile force, and obstacle‐surmounting capability and ground interaction of eachrobot. Various soil conditions typical for the area of application are taken intoaccount, which are varied in terms of moisture and density. The presented workcovers the specification of the conducted experiments, documentation of theimplementation as well as analysis and evaluation of the collected data. In theevaluation, particular attention is paid to the change in driving characteristics underdifferent soil conditions, as well as to the soil stress caused by driving, since soilquality is of critical importance for agricultural applications. The analysis shows thatthe advanced locomotion concepts, as used in space robotics, also have positiveimplications for certain requirements in agricultural applications, such as maneuver-ability in wet conditions and soil conservation. The results show potential for designinnovations in agricultural robotics that can be used, to open up new fields ofapplication for instance in the context of precision farming.
The 3GPP release 16 integrates TSN functionality into 5G and standardizes various options for TSN time synchronization over 5G such as transparent mode and bridge mode. The time domains for the TSN network and the 5G network are kept separate with an option to synchronize either of the networks to the other. The TSN time synchronization over 5G is possible either by using the IEEE 1588 generalized Precision Time Protocol (gPTP) based on UDP/IP multicast or via IEEE 802.1AS based on Ethernet PDUs. The INET and Simu5G simulation frameworks, which are both based on the OMNeT++ discrete event simulator, are widely used for simulating TSN and 5G networks. The INET framework comprises the 802.1AS based time synchronization mechanism, and Simu5G provides the 5G user plane carrying IP PDUs. We modified the 802.1AS-based synchronization model of INET so that it works over UDP/IP. With that, it is possible to synchronize TSN slaves (connected to 5G UEs), across a 5G network, with a TSN master clock, present within a TSN network, that is connected to the 5G core network. Our simulation results show that 500 microseconds of synchronization accuracy can be achieved with the corrected asymmetric propagation delay of uplink and downlink between the gNodeB (gNB) and the User Equipment (UE). Furthermore, the synchronization accuracy can be improved if the delay difference between uplink and downlink is known.
Recent real-time networking developments have enabled ultra reliability, very low latency and high data rates in wired networks. Wireless networking developments have also shown that they can achieve very high data rates with consistency, but they still lack in providing ultra reliability and extremely low latency. Time Sensitive Networking (TSN) developments have brought these capabilities in Industry automation and Automotive industry too. Although TSN is standardized for wired networks for a long time, for wireless networks it will be standardized within the IEEE 802.11be standard for Wi-Fi and 3GPP Release 17 for 5G in the near future. This paper provides an overview of TSN in wired and wireless networks with the aim of comparing different simulators and presenting their offered functionality and shortcomings. These tools can be used to make oneself familiar with TSN algorithms, standards, and for the development and testing of time sensitive networks. Afterwards, the paper discusses open research questions for using TSN over wireless networks.
This paper presents a framework for OMNeT++ which includes time synchronization model for WLANs. Synchronization is based on the Generalized Precision Time Protocol (gPTP) standard, which aims to achieve an accuracy of less than 100 nanoseconds. The presented model is developed and implemented in OMNeT++, a discrete event network simulator, using its INET library. A new type of WLAN node is modeled which supports time synchronization at the Link layer. A clock module for WLAN nodes is also modeled which implements variable clock drift to simulate noise interference in clock frequency oscillators. Simulations with our WLAN nodes are done and the results show that using gPTP based time synchronization in wireless networks, accuracy of ±3ns can be achieved.
Long Range Wide Area Network (LoRaWAN) operates in the ISM band with 868 MHz, where the Time on Air (ToA) is regulated in the EU to 1 %. LoRaWAN nodes use the Adaptive Data Rate (ADR) algorithm to adapt their data rates during operation. The standard ADR algorithm works well with stationary nodes, however is very slow in the adaptation for mobile nodes. This paper introduces a new ADR algorithm for LoRaWAN that is supported by higher level meta-data for sensor streams, namely Quality of Information (QoI). With the help of QoI it is possible to provide additional information to the new ADR algorithm, reducing the convergence time and thus improving the Packet Delivery Ratio (PDR) of data from mobile sensor nodes. The new algorithm requires only modifications on network server side and keeps backwards compatibility with LoRaWAN nodes. Results show a significant better PDR compared to the standard ADR in scenarios with a limited number of mobile nodes.
Analysis of methods for prioritizing critical data transmissions in agricultural vehicular networks
(2020)
Applying wireless communication technologies to agricultural vehicular networks often results in high end-to-end delays and loss of packets due to intermittent or broken connectivity. This paper analyses the methods for the successful delivery of the vehicular data within acceptable delay times. Different kinds of data that are generated and transmitted in agricultural networks are considered in this paper, followed by the data prioritization methods which allow critical data to be prioritized against other data. In this regard, Enhanced Distributed Channel Access, Differentiated Services, and application-based data rate variation are discussed in conjunction with the Simple Network Management Protocol. These techniques are simulated or tested separately and then together and the results show that even in poor network conditions, high-prioritized data is not lost or delayed.
Knowledge of the small-scale nutrient status of arable land is an important basis for optimizing fertilizer use in crop production. A mobile field laboratory opens up the possibility of carrying out soil sampling and nutrient analysis directly on the field. In addition to the benefits of fast data availability and the avoidance of soil material transport to the laboratory, it provides a future foundation for advanced application options, e.g. a high sampling density, sampling of small sub-fields or dynamic adaptation of the sampling line during field sampling. An innovative key component is the NUTRI-STAT ISFET sensor module. It measures values for the ions "NO3- ”, “H2PO4- " and "K+ " as well as the pH. The ISFET sensor module was specially developed for soil nutrient analysis. The phosphorus measurement was further developed for the project "soil2data". First results from the ISFET sensor module show a measurement signal settling time of significantly less than 100 seconds and a further consistent stable measurement signal. The measurement signal dynamics of approx. 58 mV per factor 10 of concentration change is given for the measured variables pH and K+. For the measured quantities of NO3- and H2PO4- , the measurement signal dynamics are lower.
Knowledge of the maximum friction coefficient µmax between tire and road is necessary for implementing autonomous driving. As this coefficient cannot be measured via existing serial vehicle sensors, µmax estimation is a challenging field in modern automotive research. In particular, model-based approaches are applied, which are limited in the estimation accuracy by the physical vehicle model. Therefore, this paper presents a data-based µmax estimation using serial vehicle sensors. For this purpose, recurrent artificial neural networks are trained, validated, and tested based on driving maneuvers carried out with a test vehicle showing improved results compared to the model-based algorithm from previous works.
Artificial intelligence (AI) promises transformative impacts on society, industry, and agriculture, while being heavily reliant on diverse, quality data. The resource-intensive "data
problem" has initialized a shift to synthetic data. One downside of synthetic data is known as the "reality gap", a lack of realism. Hybrid data, combining synthetic and real data, addresses this. The paper examines terminological inconsistencies and proposes a unified taxonomy for real, synthetic, augmented, and hybrid data. It aims to enhance AI training datasets in smart agriculture, addressing the challenges in the agricultural data landscape. Utilizing hybrid data in AI models offers improved prediction performance and adaptability.
Compliance of agricultural AI systems : app-based legal verification throughout the development
(2024)
Significant advances in artificial intelligence (AI) have been achieved; however, practical implementation in agriculture remains limited. Compliance with emerging regulations, such as the EU AI Act and GDPR, is now vital, even for non-critical AI systems. Developers need tools to assess legal compliance, which is complex, often requiring full legal advice. To address this issue, we are developing a support app that simplifies the legal aspects of AI system development, covering the entire lifecycle, from conception to distribution. The current app, which covers the key legal area of copyright and will soon include GDPR and the AI Act, aims to bridge the gap between AI research and agriculture. An evaluation of our app by experts from both the legal and the IT domains shows that the app assists the developers so that they make legally correct statements. Consequently, it promotes legal compliance and awareness among developers, contributing to the seamless integration of AI into agriculture. The need for compliant AI systems in various industries, including agriculture, will only increase as regulations evolve.
The Internet of Things (IoT) is the enabler for new innovations in several domains. It allows the connection of digital services with physical entities in the real world. These entities are devices of different categories and sizes range from large machinery to tiny sensors. In the latter case, devices are typically characterized by limited resources in terms of computational power, available memory and sometimes limited power supply. As a consequence, the use of security algorithms requires of them to work within the limited resources. This means to find a suitable implementation and configuration for a security algorithm, that performs properly on the device, which may become a challenging task. On the other side, there is the desire to protect valuable assets as strong as possible. Usually, security goals are recorded in security policies, but they do not consider resource availability on the involved device and its power consumption while executing security algorithms. This paper presents an IoT security configuration tool that helps the designer of an IoT environment to experiment with the trade-off between maximizing security and extending the lifetime of a resource constrained IoT device. The tool is controlled with high-level description of security goals in the form of policies. It allows the designer to validate various (security) configurations for a single IoT device up to a large sensor network.
Oleamide is used as a lubricant in the manufacturing and application of polypropylene (PP) medical devices. Samples of PP were prepared with 0, 1500, and 15 000 ppm oleamide content as lubricant. The samples were either left non-sterile, sterilized with ethylene oxide (ETO), γ-radiation (γ) or autoclaved (A) and stored for up to 4 weeks. To determine the oleamide bulk-to-surface distribution depending on sterilization method and storage time an extraction method and a washing technique were applied. The oleamide content was determined by gas chromatography (GC-FID) and compared with the coefficient of friction (COF). The COF dependent on the measured lubricant content at the surface. The content of lubricant on the surface depends on the type of sterilization: ETO increased the lubricant content to some extent, γ-sterilization and autoclaving reduced it. After storage, no migration of the lubricant to the surface could be detected.
In modern times, closed-loop control systems (CLCSs) play a prominent role in a wide application range, from production machinery via automated vehicles to robots. CLCSs actively manipulate the actual values of a process to match predetermined setpoints, typically in real time and with remarkable precision. However, the development, modeling, tuning, and optimization of CLCSs barely exploit the potential of artificial intelligence (AI). This paper explores novel opportunities and research directions in CLCS engineering, presenting potential designs and methodologies incorporating AI. Combining these opportunities and directions makes it evident that employing AI in developing and implementing CLCSs is indeed feasible. Integrating AI into CLCS development or AI directly within CLCSs can lead to a significant improvement in stakeholder confidence. Integrating AI in CLCSs raises the question: How can AI in CLCSs be trusted so that its promising capabilities can be used safely? One does not trust AI in CLCSs due to its unknowable nature caused by its extensive set of parameters that defy complete testing. Consequently, developers working on AI-based CLCSs must be able to rate the impact of the trainable parameters on the system accurately. By following this path, this paper highlights two key aspects as essential research directions towards safe AI-based CLCSs: (I) the identification and elimination of unproductive layers in artificial neural networks (ANNs) for reducing the number of trainable parameters without influencing the overall outcome, and (II) the utilization of the solution space of an ANN to define the safety-critical scenarios of an AI-based CLCS.
Bamboo is an environmentally friendly alternative to conventional materials in mechanical engineering such as steel or aluminium. Bamboo is the fastest growing plant in the world. Instead of releasing CO2 during the manufacturing process, bamboo absorbs CO2 as it grows.
In addition to the sustainability aspect, bamboo tubes also offer excellent properties as a lightweight construction material, which have been optimised through evolution. Bamboo tubes have high strength and stiffness at low weight when used as tension-compression bars or bending beams. Bamboo has strong, high-density fibres at the boundary area, where bending stresses are greatest. Towards the inside, where the stresses are lower, the bamboo becomes porous to optimise weight. This, together with knots arranged in regular intervals, counteracts buckling.
In mobile applications such as cars and bicycles, lightweight construction is sought for energy efficiency reasons. Because of its excellent lightweight properties, the project investigated whether bamboo could be used in mobile, automotive or agricultural engineering. For example, a bamboo bicycle frame has been developed with the aim to be as light as possible. There are bamboo bicycles on the market, but they can only be made one at a time by hand. The bamboo tubes are joined together and functional elements such as the bottom bracket and headset are integrated by wrapping them in resin-impregnated natural or carbon fibres. This makes the joints very heavy. A different approach is taken here: the bamboo tubes are drilled out slightly to achieve a defined internal diameter, and then short aluminium tubes are glued into the bamboo canes from the inside. To prevent the cane from breaking in the circumferential direction, i.e. perpendicular to the fibre direction, the bamboo tubes are wrapped in a thin layer of natural or carbon fibre impregnated with synthetic resin. The aluminium tubes and functional elements are welded or soldered together beforehand.
The design of the bicycle frame, i.e. the dimensioning of the bamboo tubes and joints, was based on extensive bending and tensile tests to determine the strength properties of the natural material bamboo. The bonding between the bamboo cane and the aluminium tube was also investigated experimentally. Finally, several prototype bicycle frames were made and tested for durability according to DIN-EN-14764. The frames passed the tests.
The result is a bamboo bicycle that is manufactured with standardised connectors and joints. The assembly concept developed allows both fully automated and semi-automated series production of bamboo bicycles.
The energy transition involves various challenges. One key aspect is the decentralization of power generation, which requires new actors. In order to integrate these into the system in the best possible way, there are various approaches e.g. in cooperation in citizens' initiatives or cooperatives (Dorniok, 2016).
Cooperation in general can enable the implementation of certain business models or can increase profitability by the exploitation of economies of scale (Skovsgaard & Jacobsen, 2017; Theurl, 2010). Synergy effects result from the utilization of know-how, different technologies or resources of the partners involved to complement the own competencies and services (Eggers & Engelbrecht, 2005; Sander, 2009). Cooperation exists in various industries and enable the participating companies to compensate their size-related resource deficits (Glaister & Buckley, 1996; Todeva & Knoke, 2005). This creates the opportunity to develop innovations, open up new markets, exploit newly created economies of scale and share costs and risks (Franco & Haase, 2015). In agriculture, cooperation in the form of cooperatives have been of essential importance for a long time, especially with the aim of exploiting synergy effects (Bareille et al., 2017). In the field of renewable energy development, cooperation in form of citizen cooperatives make a significant contribution to the participation of citizens in political, social and financial aspects of the energy transition (Huybrechts & Mertens, 2014). Energy cooperatives are frequently discussed as a potential actor in the energy transition and are increasingly being established to advance the common interests of stakeholders. For example, the joint operation of decentralized power generation plants can involve new actors in the energy transition through regional cooperation (Walk, 2014).
Existing biogas plants in Germany need new business models after the 20-year Renewable Energy Sources Act feed-in tariff expires. For continued operation, a business model innovation is needed, which can be realized based on the different technical utilization pathways. Cooperation can have a significant impact on the profitability of the different business models, especially by exploiting synergy effects (Karlsson et al., 2019). In addition, cooperation can help to ensure that existing plants continue to operate at all.
Currently, the most widespread use of biogas in Germany is in the coupled generation of electricity and heat. Additionally, there is the possibility of upgrading biogas to biomethane or biogenic hydrogen path (Mertins & Wawer, 2022).
Different options for cooperative business models that exist in the biogas utilization pathways are presented. The focus is on explaining the advantages of a joint approach compared to single-farm business models and identifying the relevant actors. Subsequently, drivers and barriers for the different cooperative business models are identified and classified based on 20 semi-structured interviews with plant operators in the administrative district of Osnabrück. The aim is to identify drivers and barriers for cooperative post-EEG operation. As a result, political instruments are to be found that make it possible to involve relevant actors and thus stimulate the best possible continued operation from the point of view of the energy system. The results are structured according to the PESTEL analysis. This assigns drivers and barriers to the categories political, economic, sociocultural, technological, ecological and legal (Kaufmann, 2021). The analysis of the interviews is supplemented and validated by a literature review.
Drivers and barriers for cooperative business models are manifold and can vary mainly depending on the plant and the operator.
Drivers
• Political
o Promotion of renewable energies: reduce dependence on fossil (Russian) fuels
• Economic
o Expectation of synergies (information sharing, shared risk, economies of scale)
o Planning security (fixed supply or purchase contracts)
o Access to new markets (not accessible by single-farm business models)
o Cost savings by sharing infrastructure, technology
o Positive return expectation
• Sociocultural
o Motivating, innovative environment
o Lowers barriers to participation in new markets
o Target-oriented partnerships
o Better use of capacities and strengths
o Strengthening regional value creation
• Technological
o Economies of scale (efficiency)
o Available, mature technology
o Storable, transportable gas
o Well-developed infrastructure
• Ecological
o Increase in plant efficiency
o Reduction of greenhouse gas emissions
o Promotion of the circular economy by utilization of organic waste and agricultural residues
o Improving soil quality (fermentation residues as fertilizer)
Barriers
• Political
o Competition to other renewable energies
• Economic
o Uncertainty about future development of energy markets
o Disagreements between the cooperation partners
o Lack of flexibility due to longer-term contractual obligations
o Allocation of profits
• Sociocultural
o Cooperation with current competitor
o Cultural differences and lack of trust
o Acceptance by the general public (e.g. overproduction of maize)
• Technological
o Different technology that is difficult to combine
o Data protection
• Ecological
o Competition for agricultural land
o Use of monocultures
o Emissions from plant
o Pollution from transport
• Legal
o Legal requirements and regulations
o Unfavorable regulatory environment, e.g. long permitting process
One finding is that uncertainty is a major barrier for plant operators. This includes uncertainty about regulatory frameworks and political requirements, as well as about the general development of the energy markets. In addition, social factors such as lack of reliability and disagreement about revenue sharing are a potential barrier. A key driver for the implementation of cooperative business models is the expectation of synergy effects. In addition, operators are driven by a positive expectation of returns and the responsibility for securing the energy supply in times of crisis.
The drivers identified can now be used to develop strategies to advance cooperative business models. In particular, synergy effects should be exploited so that operators can benefit from cooperation. The advantages can also be highlighted and communicated to increase acceptance among the general public. Another important step is to reduce the barriers discussed above. In order to reduce social barriers in particular, it may be advisable to include an external partner in the cooperation, such as a municipal utility that operates an upgrading plant and concludes purchase agreements with the individual partners. In addition, it would be politically expedient to provide the operators with a clear framework for the future in order to reduce uncertainties. As a further aspect, knowledge transfer on new technologies and markets should take place.