Refine
Year of publication
- 2019 (6) (remove)
Document Type
- Conference Proceeding (5)
- Article (1)
Language
- English (6) (remove)
Is part of the Bibliography
- yes (6)
Keywords
Institute
- Fakultät IuI (6) (remove)
This paper describes the development and test of a novel LiDAR based combine harvester steering system using a harvest scenario and sensor point cloud simulation together with an established simulation toolchain for embedded software development. For a realistic sensor behavior simulation, considering the harvesting environment and the sensor mounting position, a phenomenological approach was chosen to build a multilayer LiDAR model at system level in Gazebo and ROS. A software-in-the-loop simulation of the mechatronic steering system was assembled by interfacing the commercial AppBase framework for point cloud processing and feature detection algorithms together with a machine model and control functions implemented in MATLAB/ Simulink. A test of ECUs in a hardware-in-the-loop simulation and as well as HMI elements in a driver-in-the-loop simulation was achieved by using CAN hardware interfaces and a CANoe based restbus simulation.
The Internet of Things (IoT) relies on sensor devices to measure real-world phenomena in order to provide IoT services. The sensor readings are shared with multiple entities, such as IoT services, other IoT devices or other third parties. The collected data may be sensitive and include personal information. To protect the privacy of the users, the data needs to be protected through an encryption algorithm. For sharing cryptographic cipher-texts with a group of users Attribute-Based Encryption (ABE) is well suited, as it does not require to create group keys. However, the creation of ABE cipher-texts is slow when executed on resource constraint devices, such as IoT sensors. In this paper, we present a modification of an ABE scheme, which not only allows to encrypt data efficiently using ABE, but also reduces the size of the cipher-text, that must be transmitted by the sensor. We also show how our modification can be used to realise an instantaneous key revocation mechanism.
We describe an automated approach, to easily track patients regaining their walking ability while recovering from neurological diseases like e.g. stroke. Based on captured gait data and objective measures derived out of it the rehabilitation process can be optimized and thus steered. In order to apply such system in clinical practice two key requirements have to be fulfilled: (i) the system needs to be applicable in terms of ease of use and performance; (ii) the derived measures need to be accurate.
Optimised Nutrient Recovery from Biogas Digestate by Solid/Liquid Separation and Membrane Treatment
(2019)
Anaerobic digestion products of agricultural biogas plants are characterised by high nitrogen, phosphorus, and potassium content. In three scale-up steps, a membrane based digestate treatment process of solid-liquid-separation, ultrafiltration, and reverse osmosis for nutrient recovery was investigated. Lab-scale trials delivered a very good understanding of fluid properties and subsequent ultrafiltration performance, which is the limiting process step in terms of energy demand and operation costs. In semi-technical experiments, optimisation, and design parameters were developed, which were subsequently applied to pilot-scale tests at two full-scale biogas plants. The process optimisation resulted in 50 % energy reduction of the ultrafiltration step. About 36 % of the sludge volume was recovered as dischargeable water, 20 % as solid N/P-fertiliser, and 44 % as liquid N/K-fertiliser.
The usage of high-level synthesis (HLS) tools for FPGAs has increased significantly over the last years since they matured and allow software programmers to take advantage of reconfigurable hardware technology.
Most HLS tools employ methods to optimize for loops, e. g. by unrolling or pipelining them. But there is hardly any work on the optimization of while loops. This comes at no surprise since most while loops have loop-carried dependences involving the loop condition which result in large recurrence cycles in the dataflow graphs. Therefore typical while loops cannot be parallelized or pipelined.
We propose a novel transformation which allows to optimize while loops nested within a for loop. By interchanging the two loops, it is possible to pipeline (and thereby parallelize) the inner loop, resulting in a reduced execution time. We present two case studies on different hardware platforms and show the speedup factors - compared to a host processor and to an unoptimized hardware implementation - achieved by our while loop optimization method.
A recently published study of high temperature nitridation of iron chromium aluminum alloys (FeCrAl) at 900°C in N2–H2 has redundantly shown the formation of locally confined corrosion pockets reaching several microns into the alloy. These nitrided pockets form underneath chromia islands laterally surrounded by the otherwise protective alumina scale. Chromia renders a nitrogen‐permeable defect under the given conditions and the presence of aluminum in the alloy. In light of these findings on FeCrAl, a focused ion beam–scanning electron microscope tomography study has been undertaken on an equally nitrided FeNiCrAl sample to characterize its nitridation corrosion features chemically and morphologically. The alloy is strengthened by a high number of chromium carbide precipitates, which are also preferential chromia formation sites. Besides the confirmation of the complete encapsulation of the corrosion pocket from the alloy by a closed and dense aluminum nitride rim, very large voids have been found in the said pockets. Furthermore, metallic particles comprising nickel and iron are deposited on top of the outer oxide scale above such void regions.