Veröffentlichte Fassung/Verlagsversion
Refine
Document Type
- Conference Proceeding (5)
- Part of a Book (1)
Is part of the Bibliography
- yes (6)
Keywords
Institute
Die Digitalisierung des Bodenbeprobungsverfahrens mit einer automatisierten Generierung einer Düngeempfehlung auf Grundlage der analysierten Bodennährstoffgehalte – direkt nach Beendigung der Bodenbeprobung auf dem Acker – ist ein übergeordnetes Ziel bei der Nutzung des mobilen Feldlabors „soil2data“. Neben den Bodennährstoffanalyse-Ergebnissen sind für die Umsetzung einer automatisierten generierten Düngeempfehlung weitere Informationen notwendig.
Die Quellen dieser Informationen haben einen unterschiedlichen Ursprung. Es sind Daten aus verschiedenen Quellen vom Bewirtschafter, von Dienstleistern und vom mobilen Feldlabor, welche miteinander verknüpft und synchronisiert werden müssen. Für einen automatisierten Prozessablauf zur Generierung einer Düngeempfehlung ist die Datenorganisation eine essenzielle Voraussetzung. Die Grundlage der Empfehlung sind die Tabellenwerke der offiziellen Düngeempfehlung, die bei den für die Düngung zuständigen Behörden der Bundesländer vorliegen. In dieser Publikation werden die notwendigen Daten und der Prozessdatenfluss für die Bodenbeprobung und Düngeempfehlung-Generierung beschrieben und grafisch dargestellt.
Knowledge of the small-scale nutrient status of arable land is an important basis for optimizing fertilizer use in crop production. A mobile field laboratory opens up the possibility of carrying out soil sampling and nutrient analysis directly on the field. In addition to the benefits of fast data availability and the avoidance of soil material transport to the laboratory, it provides a future foundation for advanced application options, e.g. a high sampling density, sampling of small sub-fields or dynamic adaptation of the sampling line during field sampling. An innovative key component is the NUTRI-STAT ISFET sensor module. It measures values for the ions "NO3- ”, “H2PO4- " and "K+ " as well as the pH. The ISFET sensor module was specially developed for soil nutrient analysis. The phosphorus measurement was further developed for the project "soil2data". First results from the ISFET sensor module show a measurement signal settling time of significantly less than 100 seconds and a further consistent stable measurement signal. The measurement signal dynamics of approx. 58 mV per factor 10 of concentration change is given for the measured variables pH and K+. For the measured quantities of NO3- and H2PO4- , the measurement signal dynamics are lower.
Simulation von Laserscannern in Pflanzenbeständen für die Entwicklung umfeldbasierter Funktionen
(2018)
Es werden drei Modellierungsansätze zur Simulation von Laserscannern in Pflanzenbeständen für die Entwicklung umfeldbasierter Fahrzeugfunktionen beschrieben. Das Sensorsignal der Distanzmessung wird dabei anhand realer Messwerte oder phänomenologisch und auf der Basis empirisch ermittelter Kennwerte in Abhängigkeit von objekt- und sensorspezifischen Einflussfaktoren abgebildet. Basierend auf den Methoden zur Simulation von Distanzmesssystemen der Open Source Simulationsumgebung Gazebo wurden die Modellierungsansätze als spezifische Sensor- und Umfeldmodelle implementiert. Die Modelle wurden insbesondere für den Einsatz an mobilen landwirtschaftlichen Arbeitsmaschinen und für die Anwendung in der Getreideernte optimiert.
This paper describes the development and test of a novel LiDAR based combine harvester steering system using a harvest scenario and sensor point cloud simulation together with an established simulation toolchain for embedded software development. For a realistic sensor behavior simulation, considering the harvesting environment and the sensor mounting position, a phenomenological approach was chosen to build a multilayer LiDAR model at system level in Gazebo and ROS. A software-in-the-loop simulation of the mechatronic steering system was assembled by interfacing the commercial AppBase framework for point cloud processing and feature detection algorithms together with a machine model and control functions implemented in MATLAB/ Simulink. A test of ECUs in a hardware-in-the-loop simulation and as well as HMI elements in a driver-in-the-loop simulation was achieved by using CAN hardware interfaces and a CANoe based restbus simulation.
This article proposes the concept of a simulation framework for environmental sensors with multilevel abstraction in agricultural scenarios. The implementation case study is a simulation of a grain-harvesting scenario enabled by LiDAR sensors. Environmental sensor models as well as kinematics and dynamic behavior of machines are based on the robotics simulator Gazebo. Models for powertrain, machine process aggregates and peripheral simulation components are implemented with the help of MATLAB/ Simulink and with the robotics middleware Robot Operating System (ROS). This article deals with the general concept of a multilevel simulation framework and in particular with sensor and environmental modeling.