Refine
Year of publication
Document Type
- Conference Proceeding (46)
- Article (15)
- Book (6)
- Working Paper (4)
- Part of a Book (2)
- Bachelor Thesis (1)
- Doctoral Thesis (1)
- Moving Images (1)
- Other (1)
- Part of Periodical (1)
Keywords
- Inverted Classroom (4)
- LiDAR (3)
- Scrum (3)
- Agile Lehre (2)
- Future Skills (2)
- Gazebo (2)
- Kugelstrahlen (2)
- Materialermüdung (2)
- Power Consumption (2)
- Robot operating system (ROS) (2)
Institute
- Fakultät IuI (79) (remove)
This paper describes the development and test of a novel LiDAR based combine harvester steering system using a harvest scenario and sensor point cloud simulation together with an established simulation toolchain for embedded software development. For a realistic sensor behavior simulation, considering the harvesting environment and the sensor mounting position, a phenomenological approach was chosen to build a multilayer LiDAR model at system level in Gazebo and ROS. A software-in-the-loop simulation of the mechatronic steering system was assembled by interfacing the commercial AppBase framework for point cloud processing and feature detection algorithms together with a machine model and control functions implemented in MATLAB/ Simulink. A test of ECUs in a hardware-in-the-loop simulation and as well as HMI elements in a driver-in-the-loop simulation was achieved by using CAN hardware interfaces and a CANoe based restbus simulation.
Hintergrund Die physiotherapeutische Dokumentation spielt im Therapieprozess eine wichtige Rolle, erfolgt jedoch auf unterschiedlichste Weise. Es existieren derzeit eine Vielzahl von Softwarelösungen für die physiotherapeutische Dokumentation, welche sich jedoch in ihren Funktionalitäten stark unterscheiden. Ziel Mithilfe einer Befragung soll ein Konsens von Expertenaus der Physiotherapie im Themengebiet der softwarebasierten Dokumentation ermittelt werden. Anhand der Ergebnisse wird ein Anforderungskatalog für die Entwicklung einer neuartigen und benutzerorientierten Dokumentationssoftware erstellt. Methode Online-Delphi-Befragung mit neun Experten über drei Befragungswellen.
Ergebnisse Hinsichtlich der Anforderungen an die Anamnese konnte ein Konsens erzielt werden. Bei der Gliederung des Befundes kam es zu keiner Übereinstimmung der Experten. Das Ergebnis lässt sich durch unterschiedliche manualtherapeutische Konzepte erklären, die für die Befunderhebung verwendet wurden. Schlussfolgerung Eine softwarebasierte Dokumentation sollte standardisierter als bisher erfolgen, um den ClinicalReasoning-Prozess zu unterstützten. Gleichzeitig ist dabei eine gewisse Flexibilität geboten. Die gesammelten Anforderungen können für die Entwicklung einer neuartigen und benutzerorientierten mobilen Anwendung zur Effizienzsteigerung in der physiotherapeutischen Dokumentation verwendet werden.
Kugelstrahlen ist ein im Maschinenbau eingesetztes Verfahren zur Steigerung der Ermüdungsfestigkeit. Es wird z. B. bei hochbelasteten Komponenten in der Luft- und Raumfahrt, der Fahrzeugtechnik, im Turbomaschinenbau und weiteren Industriezweigen angewandt. Die Einstellung der Betriebsparameter der Kugelstrahlanalage findet üblicherweise mit kostenintensiven empirischen Versuchen statt, mit dem Ziel, die vorgegebene Druckeigenspannung zu erreichen. In [1, 2] wird auf der Basis einer dort beschriebenen neuartigen Elementarzelle vorgeschlagen, die Almenstreifenaufbiegung als Mittel zur Spezifikation der Verfestigung heranzuziehen. Dazu ist deren Simulation notwendig, welche sich mit der entwickelten Elementarzelle wirtschaftlich bewerkstelligen lässt. In der hier vorliegenden Veröffentlichung werden die der Elementarzelle zugrundeliegenden Finite-Elemente-Netze (FE-Netze) mithilfe von Einzelbe-schussversuchen validiert. Weiterhin wird eine ähnlichkeitsmechanische Betrachtung des Kugelstrahlprozesses zur vereinfachten Parametereinstellung vorgestellt.
The Internet of Things (IoT) relies on sensor devices to measure real-world phenomena in order to provide IoT services. The sensor readings are shared with multiple entities, such as IoT services, other IoT devices or other third parties. The collected data may be sensitive and include personal information. To protect the privacy of the users, the data needs to be protected through an encryption algorithm. For sharing cryptographic cipher-texts with a group of users Attribute-Based Encryption (ABE) is well suited, as it does not require to create group keys. However, the creation of ABE cipher-texts is slow when executed on resource constraint devices, such as IoT sensors. In this paper, we present a modification of an ABE scheme, which not only allows to encrypt data efficiently using ABE, but also reduces the size of the cipher-text, that must be transmitted by the sensor. We also show how our modification can be used to realise an instantaneous key revocation mechanism.
Nach dem Auslaufen der 20-jährigen Förderung über eine Einspeisevergütung im Rahmen des Erneuerbare-Energien-Gesetzes (EEG) gibt es für deutsche Biogasanlagen diverse technische Möglichkeiten für einen Weiterbetrieb. Neben der Wirtschaftlichkeit sind die Anlagenbetreibenden ein wesentlicher Entscheidungsfaktor für den Weiterbetrieb der Anlage. Somit ergibt sich die zentrale Fragestellung „Welche Treiber und Hemmnisse für Betreibende von Bestandsbiogasanlagen in Deutschland bestehen in den verschiedenen Nutzungspfaden für Biogas, sowie für kooperative Geschäftsmodelle?“. Die Erkenntnisse können unter anderem dafür genutzt werden, die Situation der Anlagenbetreibenden besser zu verstehen, um notwendige Unterstützung für einen Weiterbetrieb, beispielsweise durch Kommunen, zur Verfügung stellen zu können.
Artificial intelligence (AI) promises transformative impacts on society, industry, and agriculture, while being heavily reliant on diverse, quality data. The resource-intensive "data
problem" has initialized a shift to synthetic data. One downside of synthetic data is known as the "reality gap", a lack of realism. Hybrid data, combining synthetic and real data, addresses this. The paper examines terminological inconsistencies and proposes a unified taxonomy for real, synthetic, augmented, and hybrid data. It aims to enhance AI training datasets in smart agriculture, addressing the challenges in the agricultural data landscape. Utilizing hybrid data in AI models offers improved prediction performance and adaptability.
Der Einsatz paralleler Hardware-Architekturen betrifft alle Software-Entwickler und -Entwicklerinnen: vom Supercomputer bis zum eingebetteten System werden Multi- und Manycore-Systeme inzwischen eingesetzt. Die Herausforderungen an das Software Engineering sind vielfältig. Zum einen ist (wieder) ein stärkeres Verständnis für die Hardware notwendig. Ohne eine skalierbare Partitionierung der Software und parallele Algorithmen bleibt die Rechenleistung ungenutzt. Zum anderen stehen neue Programmiersprachen im Vordergrund, die die Ausführung von parallelen Anweisungen ermöglichen.
Dieses Buch betrachtet unterschiedliche Aspekte bei der Entwicklung paralleler Systeme und berücksichtigt dabei auch eingebettete Systeme. Es verbindet Theorie und praktische Anwendung und ist somit für Studierende und Anwender in der Praxis gleichermaßen geeignet. Durch die programmiersprachenunabhängige Darstellung der Algorithmen können sie leicht für die eigene Anwendung angepasst werden. Viele praktische Projekte erleichtern das Selbststudium und vertiefen das Gelernte.
Simulation von Laserscannern in Pflanzenbeständen für die Entwicklung umfeldbasierter Funktionen
(2018)
Es werden drei Modellierungsansätze zur Simulation von Laserscannern in Pflanzenbeständen für die Entwicklung umfeldbasierter Fahrzeugfunktionen beschrieben. Das Sensorsignal der Distanzmessung wird dabei anhand realer Messwerte oder phänomenologisch und auf der Basis empirisch ermittelter Kennwerte in Abhängigkeit von objekt- und sensorspezifischen Einflussfaktoren abgebildet. Basierend auf den Methoden zur Simulation von Distanzmesssystemen der Open Source Simulationsumgebung Gazebo wurden die Modellierungsansätze als spezifische Sensor- und Umfeldmodelle implementiert. Die Modelle wurden insbesondere für den Einsatz an mobilen landwirtschaftlichen Arbeitsmaschinen und für die Anwendung in der Getreideernte optimiert.
In modern times, closed-loop control systems (CLCSs) play a prominent role in a wide application range, from production machinery via automated vehicles to robots. CLCSs actively manipulate the actual values of a process to match predetermined setpoints, typically in real time and with remarkable precision. However, the development, modeling, tuning, and optimization of CLCSs barely exploit the potential of artificial intelligence (AI). This paper explores novel opportunities and research directions in CLCS engineering, presenting potential designs and methodologies incorporating AI. Combining these opportunities and directions makes it evident that employing AI in developing and implementing CLCSs is indeed feasible. Integrating AI into CLCS development or AI directly within CLCSs can lead to a significant improvement in stakeholder confidence. Integrating AI in CLCSs raises the question: How can AI in CLCSs be trusted so that its promising capabilities can be used safely? One does not trust AI in CLCSs due to its unknowable nature caused by its extensive set of parameters that defy complete testing. Consequently, developers working on AI-based CLCSs must be able to rate the impact of the trainable parameters on the system accurately. By following this path, this paper highlights two key aspects as essential research directions towards safe AI-based CLCSs: (I) the identification and elimination of unproductive layers in artificial neural networks (ANNs) for reducing the number of trainable parameters without influencing the overall outcome, and (II) the utilization of the solution space of an ANN to define the safety-critical scenarios of an AI-based CLCS.
Management of agricultural processes is often troubled by disconnections and data transfer failures. Limited cellular network coverage may prevent information exchange between mobile process participants.
The research projects KOMOBAR and ISOCom designed, implemented und field-tested a delay tolerant platform for robust communication in rural areas and challenging environments. An adaptable combination of infrastructure-based cellular networks and infrastructure-free multihop ad hoc communication (WLAN) leads to a variety of new communication opportunities. Temporal storage and forwarding of data on mobile farm machinery as well as dynamic platform configurations during process runtime strongly enhance reliability and robustness of data transfers.
We describe an automated approach, to easily track patients regaining their walking ability while recovering from neurological diseases like e.g. stroke. Based on captured gait data and objective measures derived out of it the rehabilitation process can be optimized and thus steered. In order to apply such system in clinical practice two key requirements have to be fulfilled: (i) the system needs to be applicable in terms of ease of use and performance; (ii) the derived measures need to be accurate.
Es ist davon auszugehen, dass weltweit etwa die Hälfte der industriell eingesetzten Wärme als Abwärme ungenutzt verloren geht (Quelle: Effiziente Energieversorgung durch Abwärme, Fachmagazin Energy 2.0, April 2012). Vor dem Hintergrund der Nachhaltigkeit und Energieeffizienz ist es eine verantwortungsvolle Aufgabe, diese ungenutzte Energieressource schrittweise zu erschließen. Für die bisherige Vernachlässigung verfügbarer Energiequellen gibt es spezifische Gründe, die erkannt und projektbezogen möglichst ausgeräumt werden müssen. Dazu hat die Hochschule Osnabrück in Kooperation mit dem Kompetenzzentrum Energie und dem Landkreis Osnabrück eine Studie erstellt.
Regionales Wärmekataster Industrie - ReWIn
Diese Konzeptstudie schafft durch eine vorangestellte Recherche der bereits entwickelten Methoden und Technologien zur Abwärmenutzung eine Grundlage zur Potenzialabschätzung und Aufstellung eines Wärmekatasters für den Landkreis Osnabrück.
In der Studie werden für die typisch energieintensiven Branchen des Landkreises methodische Berechnungsansätze mit statistischen, branchenbezogenen Energiekennwerten und vorerst anonymisierten Unternehmensdaten neuartig kombiniert, um eine regionale Potenzialkarte der Abwärme zu erstellen. Die Studie wurde vom Europäischen Fonds für regionale Entwicklung (EFRE) gefördert.
The Internet of Things (IoT) is the enabler for new innovations in several domains. It allows the connection of digital services with physical entities in the real world. These entities are devices of different categories and sizes range from large machinery to tiny sensors. In the latter case, devices are typically characterized by limited resources in terms of computational power, available memory and sometimes limited power supply. As a consequence, the use of security algorithms requires of them to work within the limited resources. This means to find a suitable implementation and configuration for a security algorithm, that performs properly on the device, which may become a challenging task. On the other side, there is the desire to protect valuable assets as strong as possible. Usually, security goals are recorded in security policies, but they do not consider resource availability on the involved device and its power consumption while executing security algorithms. This paper presents an IoT security configuration tool that helps the designer of an IoT environment to experiment with the trade-off between maximizing security and extending the lifetime of a resource constrained IoT device. The tool is controlled with high-level description of security goals in the form of policies. It allows the designer to validate various (security) configurations for a single IoT device up to a large sensor network.
Process modeling languages help to define and execute processes and workflows. The Business Process Model and Notation (BPMN) 2.0 is used for business processes in commercial areas such as banks, shops, production and supply industry. Due to its flexible notation, BPMN is increasingly being used in non-traditional business process domains like Internet of Things (IoT) and agriculture. However, BPMN does not fit well to scenarios taking place in environments featuring limited, delayed, intermittent or broken connectivity. Communication just exists for BPMN - characteristics of message transfers, their priorities and connectivity parameters are not part of the model. No backup mechanism for communication issues exists, resulting in error-prone and failing processes. This paper introduces resilient BPMN (rBPMN), a valid BPMN extension for process modeling in unreliable communication environments. The meta model addition of opportunistic message flows with Quality of Service (QoS) parameters and connectivity characteristics allows to verify and enhance process robustness at design time. Modeling of explicit or implicit, decision-based alternatives ensures optimal process operation even when connectivity issues occur. In case of no connectivity, locally moved functionality guarantees stable process operation. Evaluation using an agricultural slurry application showed significant robustness enhancements and prevented process failures due to communication issues.
The effects of reaction parameters on Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0001 production from ethanol photocatalysis in the gas phase have been investigated. The photocatalytic activity evolves from an early mass‐transfer limited regime to an independent one at later irradiation times, which is interpreted in terms of a photocatalytic site activity distribution. Ethanol molar fraction exhibits two different domains, with Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0002 production increasing up to a molar fraction of 0.12, beyond which it plateaus. Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0003 :AcH ratios are very sensitive to reaction conditions, reaching 1.8 at low reactant flows. UV light is converted to Hurn:x-wiley:23670932:media:cptc202000216:cptc202000216-math-0004 with an efficiency of nearly 3 %.
In this experimental work, the quasi static and fatigue properties of a 40 wt.% long carbon fiber reinforced partially aromatic polyamide (Grivory GCL-4H) were investigated. For this purpose, microstructural parameter variations in the form of different thicknesses and different removal directions from injectionmolded plates were evaluated. Mechanical properties decreased by increasing misalignment away from the melt flow direction. By changing the specimen thickness, no change in the general fiber distribution pattern transversal and normal to the axis of melt flow was observed. It has shown that with increasing specimen thickness the quasi static properties along the melt flow direction decreased and vice versa resulting in superior properties normal to the melt flow axis. At around 5 mm, an intersection suggests quasi-isotropic behavior. In addition, the fatigue strength of the material was significantly higher in the flow direction than normal to the flow direction. No change in fatigue life was observed while changing specimen thickness. The Basquin equation seems to describe the effect of stress amplitude on the fatigue strength of this composite. Scanning electron microscopy was used to investigate fracture surfaces of tested specimens. Results show that mechanical properties and morphological structures depend highly on fiber orientation.
Currently, soil nutrient analysis involves two separate processes for soil sampling and nutrient analysis: 1. field soil sampling and 2. laboratory analysis. These two - separate - main work processes are combined and conceptualised for a mobile field laboratory so that soil sampling and analysis can be carried out simultaneously in the field. The module-based field laboratory "soil2data" can carry out these two main work processes in parallel and consists of 5 different task-specific modules that build on each other: app2field, field2soil, app2liquid, liquid2data and data2app. The individual modules were designed and built for the sub-process steps and adapted to the special features of the mobile field laboratory "soil2data". The biggest advantage is that the analysis results are available immediately, and a fertiliser recommendation can be generated instantly. For further analyses, the results are stored in the data cloud. The soil material remains in the field. In the ongoing project "Prototypes4soil2data", the mobile field laboratory soil2data is being further developed into a prototype with a modular structure.
Protection and privacy of data in cooperative agricultural processes : the challenges of the future
(2016)
In agriculture, the growing usage of sensors, smart mobile machinery and information systems results in high volumes of data. The data differs in accuracy, frequency, volume, type and, most importantly, owner of the information. However, cooperative processes and big data analyses require access to comprehensive amounts of data for successful agricultural operation and reasoning. In some processes instructed contractors even gather data belonging to other owners and use it for machinery operation optimisation and accounting (e.g. yield in maize harvest). Today’s approach of data handling has a high potential to conflict with European and national regulations for data protection and privacy. This article presents a concept for continuous data protection and privacy in cooperative agricultural processes. The concept aims at ensuring data sovereignty for the owner while making as much data usable for process operation and big data research at the same time. Briefly explained, owners pick a collection of data and create usage licenses for other players. The licenses specify time-limited and / or position-bound access to the data collection. Privacy environments in soft- and / or hardware protect access rights on end user devices, data share hubs and machinery devices such as agricultural terminals. In addition to access right configurations, digital signatures prevent data manipulation when cooperative players capture data during processes. Socalled signature boxes represent certificated soft- or hardware components, which are located close at data sources (e.g. as hardware attached to sensors on mobile machinery) and bind the data captured with digital signatures.
Der nachfolgende Projektbericht, welcher im Rahmen des Masterprojektes und des Moduls „Bildgebende Sensortechnik“ erarbeitet wurde, ist wie folgt den beiden Fächern zuzuordnen.
Die Kapitel, welche sich mit der Inbetriebnahme und den Umgang des SICK RMS320 Radarsensors beschäftigen, sind Teil des Masterprojektes. Dies betrifft die Kapitel 2.2, 4.1, 4.3 und in Teilen das Kapitel 4.5.
Dem Modul „Bildgebende Sensortechnik“ sind hingegen die Messung des Einflusses von Kleidung auf die Erkennungsfähigkeit eines Menschen sowie die Radarmessungen der verschiedene Prüfkörper zuzuordnen. Dies wird in den Kapiteln 2.3, 3, 4.2, 4.4 und 4.5 behandelt.
Die „Grundlagen der Radartechnik“ sind für beide Teile gleichbedeutend wichtig.