Refine
Year of publication
Document Type
- Conference Proceeding (58) (remove)
Keywords
- LiDAR (3)
- Agile Lehre (2)
- Gazebo (2)
- Inverted Classroom (2)
- Power Consumption (2)
- Robot operating system (ROS) (2)
- Scrum (2)
- Simulation and Modeling (2)
- biogas (2)
- lab on a chip (2)
Institute
- Fakultät IuI (58) (remove)
The usage of high-level synthesis (HLS) tools for FPGAs has increased significantly over the last years since they matured and allow software programmers to take advantage of reconfigurable hardware technology.
Most HLS tools employ methods to optimize for loops, e. g. by unrolling or pipelining them. But there is hardly any work on the optimization of while loops. This comes at no surprise since most while loops have loop-carried dependences involving the loop condition which result in large recurrence cycles in the dataflow graphs. Therefore typical while loops cannot be parallelized or pipelined.
We propose a novel transformation which allows to optimize while loops nested within a for loop. By interchanging the two loops, it is possible to pipeline (and thereby parallelize) the inner loop, resulting in a reduced execution time. We present two case studies on different hardware platforms and show the speedup factors - compared to a host processor and to an unoptimized hardware implementation - achieved by our while loop optimization method.
This paper describes the development and test of a novel LiDAR based combine harvester steering system using a harvest scenario and sensor point cloud simulation together with an established simulation toolchain for embedded software development. For a realistic sensor behavior simulation, considering the harvesting environment and the sensor mounting position, a phenomenological approach was chosen to build a multilayer LiDAR model at system level in Gazebo and ROS. A software-in-the-loop simulation of the mechatronic steering system was assembled by interfacing the commercial AppBase framework for point cloud processing and feature detection algorithms together with a machine model and control functions implemented in MATLAB/ Simulink. A test of ECUs in a hardware-in-the-loop simulation and as well as HMI elements in a driver-in-the-loop simulation was achieved by using CAN hardware interfaces and a CANoe based restbus simulation.
The Internet of Things (IoT) relies on sensor devices to measure real-world phenomena in order to provide IoT services. The sensor readings are shared with multiple entities, such as IoT services, other IoT devices or other third parties. The collected data may be sensitive and include personal information. To protect the privacy of the users, the data needs to be protected through an encryption algorithm. For sharing cryptographic cipher-texts with a group of users Attribute-Based Encryption (ABE) is well suited, as it does not require to create group keys. However, the creation of ABE cipher-texts is slow when executed on resource constraint devices, such as IoT sensors. In this paper, we present a modification of an ABE scheme, which not only allows to encrypt data efficiently using ABE, but also reduces the size of the cipher-text, that must be transmitted by the sensor. We also show how our modification can be used to realise an instantaneous key revocation mechanism.
With the increasing size and complexity of embedded systems, the impact of software on energy consumption is becoming more important. Previous research focused mainly on energy optimization at the hardware level. However, little research has been carried out regarding energy optimization at the software design level. This paper focuses on the software design level and addresses the gap between software and hardware design for embedded systems. This is achieved by proposing a framework for software design patterns, which takes aspects of power consumption and time behavior of the hardware level into account. We evaluate the expressiveness of the framework by applying it to well-known and novel design patterns. Furthermore, we introduce a dimensionless numerical efficiency factor to make possible energy savings quantifiable.
This paper presents an optimized algorithm for estimating static and dynamic gait parameters. We use a marker- and contact-less motion capture system that identifies 20 joints of a person walking along a corridor.
Based on the proposed gait cycle detection basic metrics as walking frequency, step/stride length, and support phases are estimated automatically. Applying a rigid body model, we are capable to calculate static and dynamic gait stability metrics. We conclude with initial results of a clinical study evaluating orthopaedic technical support.
Analysis of methods for prioritizing critical data transmissions in agricultural vehicular networks
(2020)
Applying wireless communication technologies to agricultural vehicular networks often results in high end-to-end delays and loss of packets due to intermittent or broken connectivity. This paper analyses the methods for the successful delivery of the vehicular data within acceptable delay times. Different kinds of data that are generated and transmitted in agricultural networks are considered in this paper, followed by the data prioritization methods which allow critical data to be prioritized against other data. In this regard, Enhanced Distributed Channel Access, Differentiated Services, and application-based data rate variation are discussed in conjunction with the Simple Network Management Protocol. These techniques are simulated or tested separately and then together and the results show that even in poor network conditions, high-prioritized data is not lost or delayed.
Process modeling languages help to define and execute processes and workflows. The Business Process Model and Notation (BPMN) 2.0 is used for business processes in commercial areas such as banks, shops, production and supply industry. Due to its flexible notation, BPMN is increasingly being used in non-traditional business process domains like Internet of Things (IoT) and agriculture. However, BPMN does not fit well to scenarios taking place in environments featuring limited, delayed, intermittent or broken connectivity. Communication just exists for BPMN - characteristics of message transfers, their priorities and connectivity parameters are not part of the model. No backup mechanism for communication issues exists, resulting in error-prone and failing processes. This paper introduces resilient BPMN (rBPMN), a valid BPMN extension for process modeling in unreliable communication environments. The meta model addition of opportunistic message flows with Quality of Service (QoS) parameters and connectivity characteristics allows to verify and enhance process robustness at design time. Modeling of explicit or implicit, decision-based alternatives ensures optimal process operation even when connectivity issues occur. In case of no connectivity, locally moved functionality guarantees stable process operation. Evaluation using an agricultural slurry application showed significant robustness enhancements and prevented process failures due to communication issues.
Due to the resource-constrained nature of embedded systems, it is crucial to support the estimation of their power consumption as early in the development process as possible. Non-functional requirements based on power consumption directly impact the software design, e.g., watt-hour thresholds and expected lifetimes based on battery capacities. Even if software affects hardware behavior directly, these types of requirements are often overlooked by software developers because they are commonly associated with the hardware layer. Modern trends in software engineering such as Model-Driven Development (MDD) can be used in embedded software development to evaluate power consumption-based requirements in early design phases. However, power consumption aspects are currently not sufficiently considered in MDD approaches. In this paper, we present a model-driven approach using Unified Modeling Language profile extensions to model hardware components and their power characteristics. Software m odels are combined with hardware models to achieve a system-wide estimation, including peripheral devices, and to make the power-related impact in early design stages visible. By deriving energy profiles, we provide software developers with valuable feedback, which may be used to identify energy bugs and evaluate power consumption-related requirements. To demonstrate the potential of our approach, we use a sensor node example to evaluate our concept and to identify its energy bugs.
Der Beitrag beschreibt das Veranstaltungskonzept ICMScrum, welches die Ideen des Inverted Classroom mit Elementen aus Scrum kombiniert. Beginnend mit Anforderungen des aktuellen und zukünftigen Arbeitsmarktes werden die zentralen Elemente der Methodik anhand eines praktizierten Beispiels vorgestellt und kritisch diskutiert.
Der Beitrag beschreibt als Werkstattbericht die Kombination des Inverted Classroom Modells mit der agilen Entwicklungsmethodik von Scrum zu einem Veranstaltungskonzept für ein Grundlagenfach der Informatik. Neben der fachspezifischen Lehre wird dadurch das Vorgehen die in der Informatik immer wichtiger werdende agile Entwicklungsmethodik zum überfachlichen Kompentenzerwerb adressiert. Der Beitrag stellt die Umsetzung der agilen Lehrmethodik vor und gibt erste Rückmeldungen aus Sicht von Studierenden und Lehrenden.
Long Range Wide Area Network (LoRaWAN) operates in the ISM band with 868 MHz, where the Time on Air (ToA) is regulated in the EU to 1 %. LoRaWAN nodes use the Adaptive Data Rate (ADR) algorithm to adapt their data rates during operation. The standard ADR algorithm works well with stationary nodes, however is very slow in the adaptation for mobile nodes. This paper introduces a new ADR algorithm for LoRaWAN that is supported by higher level meta-data for sensor streams, namely Quality of Information (QoI). With the help of QoI it is possible to provide additional information to the new ADR algorithm, reducing the convergence time and thus improving the Packet Delivery Ratio (PDR) of data from mobile sensor nodes. The new algorithm requires only modifications on network server side and keeps backwards compatibility with LoRaWAN nodes. Results show a significant better PDR compared to the standard ADR in scenarios with a limited number of mobile nodes.
Auf vielen Landmaschinen wird der CAN-Bus zur Übertragung von Daten zwischen Sensoren, Aktoren und Steuergeräten genutzt. Anwendungen wie Rückfahrkameras und Bird-ViewAnzeigen erfordern in der Regel zusätzliche, breitbandige Kommunikationskanäle. Dieser Beitrag untersucht, inwieweit ein gemeinschaftliches Kommunikationsmedium auf Basis von Ethernet zur Realisierung aktueller und zukünftiger Anwendungen auf Landmaschinen genutzt werden kann. Zusätzlich wird der Einsatz aktueller Technologien wie Audio/Video Bridging, Time-Sensitive Networking und Wifi auf einem Landmaschinengespann untersucht und bewertet.
Today's development of client-side web applications is based on one of the JavaScript-frameworks, such as Angular or React. The excessive dependencies that arise in the ecosystem from the Node-Package-Manager increase the security risk and the dependency of your own web application on third-party packages. Moreover, the frameworkless approach proposes a renaissance of classic web development, because it strives to avoid external dependencies as far as possible and to fall back on the standards. Whether the implementation achieves maintainability and security of frameworks is questionable. Therefore, it makes sense to research which core concepts of the frameworks meet the requirements for maintainability and security and how these are implemented. The novelty is that the concepts to be explored are moved to a standard in order to ensure the developer efficiency, security, performance and maintainability in the long term. This allows existing approaches to focus on other essential features.
The expiry of national subsidies for biogas in Germany means that new business models are needed. Furthermore, hydrogen is expected to make a significant contribution to the energy transition in the future. Therefore, potentials for the production of hydrogen from biogas are identified in this study. A joint upgrading infrastructure is developed that models the collaborative upgrading of biogas to hydrogen for existing biogas plants with subsequent gas grid injection. Furthermore, regions are identified that are particularly suitable as pioneer regions in Germany due to a high potential for green hydrogen production and comparatively low costs for hydrogen production. The modeling shows that collaborative upgrading achieves significant cost savings compared to single-farm upgrading. Furthermore, the potential for hydrogen production from biogas and the costs of upgrading differ significantly within the administrative districts in Germany.
Currently, soil nutrient analysis involves two separate processes for soil sampling and nutrient analysis: 1. field soil sampling and 2. laboratory analysis. These two - separate - main work processes are combined and conceptualised for a mobile field laboratory so that soil sampling and analysis can be carried out simultaneously in the field. The module-based field laboratory "soil2data" can carry out these two main work processes in parallel and consists of 5 different task-specific modules that build on each other: app2field, field2soil, app2liquid, liquid2data and data2app. The individual modules were designed and built for the sub-process steps and adapted to the special features of the mobile field laboratory "soil2data". The biggest advantage is that the analysis results are available immediately, and a fertiliser recommendation can be generated instantly. For further analyses, the results are stored in the data cloud. The soil material remains in the field. In the ongoing project "Prototypes4soil2data", the mobile field laboratory soil2data is being further developed into a prototype with a modular structure.
Knowledge of the small-scale nutrient status of a field is an important basis for decision-making when it comes to optimising the fertiliser use in crop production. Currently, the traditional method involves soil sampling in the field and soil sample analysis in the laboratory as two separate working processes.
The previous research project "soil2data" developed a mobile field laboratory for different carrier vehicles. In the follow-up project "prototypes4soil2data", the results of soil2data are further developed. A mixed soil sample is collected during the drive on the field. The soil sample is then wet-chemically prepared and analysed. The overall soil sampling and analysis process is divided into the following process steps: soil sampling planning, soil sampling, soil preparation, soil analysis and data management. The process steps are modified for the mobile field laboratory and the process steps run in parallel. The new soil extraction method is based on official German methods (VDLUFA) to ensure the interoperability of the analysis results with the VDLUFA fertiliser recommendations. An innovative key component is the NUTRISTAT analysis module (lab-on-chip with ISFET measurement technology). It can measure pH, the nutrients NO3-, H2PO4-, K+ and the electrical conductivity. In addition to the advantages of rapid data availability and no need to transport soil material to the laboratory, it provides a future basis for new application, e.g. verification of current results in the field during soil sampling with existing results or dynamic adjustment of soil sampling during work in the field.
The Internet of Things (IoT) is the enabler for new innovations in several domains. It allows the connection of digital services with real, physical entities. These entities are devices of different categories and range in size from large machinery to tiny sensors. In the latter case, devices are typically characterized by limited resources in terms of computational power, available memory and sometimes limited power supply. As a consequence, the use of security algorithms requires expert knowledge in order for them to work within the limited resources. That means to find a suitable configuration for the algorithms to perform properly on the device. On the other side, there is the desire to protect valuable assets as strong as possible. Usually, security goals are captured in security policies, but they do not consider resource availability on the involved device and their consumption while executing security algorithms. This paper presents a resource aware information exchange model and a generation tool that uses high-level security policies as input. The model forms the conceptual basis for an automated security configuration recommendation system.
This paper presents a framework for OMNeT++ which includes time synchronization model for WLANs. Synchronization is based on the Generalized Precision Time Protocol (gPTP) standard, which aims to achieve an accuracy of less than 100 nanoseconds. The presented model is developed and implemented in OMNeT++, a discrete event network simulator, using its INET library. A new type of WLAN node is modeled which supports time synchronization at the Link layer. A clock module for WLAN nodes is also modeled which implements variable clock drift to simulate noise interference in clock frequency oscillators. Simulations with our WLAN nodes are done and the results show that using gPTP based time synchronization in wireless networks, accuracy of ±3ns can be achieved.