Refine
Year of publication
Document Type
- Article (74) (remove)
Language
- English (74) (remove)
Keywords
- Auftragschweißen (1)
- Catchment order (1)
- Conservation planning (1)
- Danube (1)
- FIB-SEM tomography (1)
- Family-relatedness of work decisions (1)
- FeNiCrAl (1)
- Freshwater (1)
- Freshwater fish (1)
- Frühe Hilfen (1)
Institute
- Fakultät WiSo (47)
- Institut für Duale Studiengänge (11)
- Institut für Management und Technik (7)
- Fakultät IuI (6)
- Fakultät AuL (5)
Semi-solid metal alloys, as used in thixoforming, have a special microstructure of globular grains suspended in a liquid metal matrix. The complex rheological properties are strongly influenced by the local solid fraction, particle shape, particle size and state of agglomeration. There is a high demand for models and software tools allowing the simulation of semi-solid casting processes. The material under investigation is a tin-lead alloy (Sn-15%Pb) which exhibits a similar microstructure to aluminium alloys. The experiments were performed with a concentric cylinder rheometer of the Searle type. Initially, the liquid alloy is cooled down to the semi-solid range under constant shearing and then kept under isothermal conditions for further experimentation. Based on the experimental data, a single-phase model has been derived where the semi-solid alloy is regarded as a homogeneous material with thixotropic properties and the microstructure is characterised by a structural parameter. The model consists of two parts: the equation of state, including a finite yield stress, and a rate equation for the structural parameter. The model equations are employed in numerical software and used for the simulation of characteristic filling cases and the comparison with the conventional filling.
Semi-solid metal alloys, as used in thixoforming, have a special microstructure of globular grains suspended in a liquid metal matrix. The material under investigation is a tin–lead alloy (Sn–15% Pb) which exhibits a similar microstructure as aluminum alloys. The experiments were performed with concentric cylinder rheometers. Initially, the liquid alloy is cooled down to the semi-solid range under constant shearing and then kept under isothermal conditions for further experimentation. The microstructure is characterized in dependence of the shearing time. The rheological techniques consisted of step change of shear rate and shear stress ramp experiments for different solid fractions (40–50%). Based on the experimental data a single phase model has been derived, where the semi-solid alloy is regarded as a homogeneous material with thixotropic properties and the microstructure is characterized by a structural parameter. The model consists of two parts: the equation of state, including a finite yield stress, and a rate equation for the structural parameter. The model equations are employed into numerical software and used for the simulation of a characteristic thixocasting process. The results are compared to real experiments.
Investigation of the use of ceramic materials in innovative light water reactor – fuel rod concepts
(2001)
Semi-solid metal alloys, as used in industrial thixoforming, have a special microstructure of globular grains suspended in a liquid metal matrix. The complex rheological properties are strongly influenced by the local solid fraction, particle shape, particle size and state of agglomeration. It was analysed how the microstructure develops in dependence of the shear rate and cooling rate during the solidification and it was observed that the average particle size increased with increasing shear rate and decreasing cooling rate. In order to account for those phenomena, the rate of crystal growth and the relationship between average particle diameter and viscosity was modelled by applying the Sherwood two-film model for the mass transport. The dependence of the viscosity from the particle size were modelled with a modified Krieger–Dougherty model. Based on the rheological and microstructural observations an evaluation method was elaborated that allows for the construction of objective master curves that are independent of the particle growth during the experimentation. The isothermal experiments for the characterisation of the rheological behaviour consisted of step-change of shear-rate and yield-stress experiments. From the experimental data the steady-state flow curves could be determined as well as the time-dependent relaxation of the shear stress after a change of shear rate. The steady-state rheological behaviour was found to be shear thinning. Nevertheless, immediately after a shear-rate change an overshoot was observed that resulted from a short-time shear-thickening behaviour. The yield stress was found to strongly depend on the microstructure and the degree of agglomeration of the solid phase. With increasing rest time the yield stress was increasing strongly, because of the agglomeration of the solid particles. Based on the step-change of shear-rate experiments a single-phase flow has been developed that consists of a modified Herschel–Bulkley approach and accounts for the thixotropic as well as for the yield-stress behaviour of the alloys.
Data warehouse systems have become a basic technological infrastructure in management decision making. Nevertheless, the overall utility of data warehouses remains unmeasured in most practical cases. As a consequence of this, IT-managers do not possess appropriate means to evaluate warehouse benefits in order to decide about investments in warehousing technology. This paper develops a controlling instrument for data warehouse systems based on the Balanced Scorecard (BSC) approach. On the basis of the technological aspects of data warehouse systems, the BSC perspectives are developed and populated with relevant objectives and measures for datawarehouse success. These perspectives are integrated into a consistent data warehouse scorecard. Finally, this instrument provides a holistic approach to drive the performance of data warehouse systems.
Building on Hofstede's finding that individualism and social hierarchy are incompatible at the societal level, the authors examined the relationship between individualism-collectivism and orientations toward authority at the individual level. In Study 1, authoritarianism was related to three measures of collectivism but unrelated to three measures of individualism in a U.S. sample (N = 382). Study 2 used Triandis's horizontal-vertical individualism-collectivism framework in samples from Bulgaria, Japan, New Zealand, Germany, Poland, Canada, and the United States (total N = 1,018). Both at the individual level and the societal level of analysis, authoritarianism was correlated with vertical individualism and vertical collectivism but unrelated to horizontal collectivism. Horizontal individualism was unrelated to authoritarianism except in post-Communist societies whose recent history presumably made salient the incompatibility between state authority and self-determination.
Every modern institution involved in higher education needs a Learning Management System (LMS) to handle learning and teaching processes. It is necessary to offer e.g. electronic lecture materials to the students for download via the internet. In some educational contexts, it is also necessary to offer internet tutorials to be able to give the students more personal support and accompany them through the whole lecture period. Many organisations have introduced commercial LMS and gained the experience that monolithic solutions do not fulfil the dynamic requirements of complex educational institutions and are very cost-intensive. Therefore, many universities face the decision to stick to their commercial LMS or to switch to a potentially more cost-effective and flexible solution, for instance by adopting available Open Source LMS. Since we have made profound experience in developing and operating an Open Source LMS, this contribution enlightens the main characteristics of this alternative. This paper describes a use case dealing with a full product lifecycle (development, deployment, use and evaluation) of an Open Source LMS at the University of Muenster (Germany). It identifies relevant instruments and aspects of system design which software architects in practical application domains should pay attention to.
Companies and R&D institutions increasingly collaborate not only in isolated projects but also in knowledge-based networks. In those networks, participants combine expertise and applied problems to generate both ‘problem-solving knowledge’ and specialized knowledge: during the process of common problem-solving each partner acquires some of the specialized knowledge of the other partners as well as the newly generated problem-solving knowledge. This article examines the basic principles involved and provides a simple mathematical description of the step-by-step accumulation of knowledge through the solving of applied problems in a knowledge-based network. The rate of increase of the total amount of available knowledge in the network is derived and implications for the orientation of R&D institutes and companies are set out.
Model Driven Architecture (MDA): Integration and Model Reuse for Open Source eLearning Platforms
(2005)
The purpose of this study was to evaluate which mode of birth first-time mothers in Germany and in the USA prefer and how this desire is related to maternal well-being and sense of coherence. The paper describes emotional well-being postpartum in relationship to mode of birth. For data collection a prospective cohort study was conducted in both countries. A self-administered questionnaire including validated instruments (WHO-5 Well-Being Index, Sense of Coherence Scale and Edinburgh Postnatal Depression Scale) was used. Results showed that only a few of the pregnant women in Germany and the USA preferred to deliver by caesarean section. There was a relationship between women's well-being, women's sense of coherence and the preferred mode of birth. The majority of women who wanted a caesarean section delivered in this way. No relationship was found between women's well-being and the type of birth experienced. Well-being in both samples generally decreased after giving birth, but there was a difference between German and American first-time mothers on the postpartum well-being and depression scores. German mothers had a higher postnatal quality of life and lower postnatal depression scores. To give families the opportunity for a healthy start, midwives and obstetricians should try to enhance women's well-being and they should give some thought to health professionals' decision-making processes. Expanded postpartum care might have an impact on women's depression scores..
Business-driven development favors the construction of process models
at different abstraction levels and by different people. As a consequence, there is a demand for consolidating different versions of process models by merging them. In this paper, we study a basic scenario, derive requirements and present a prototype for detecting and resolving changes between process models.
Purpose
– The purpose of this paper is to present the current empirical research examining communication, compensation and logistics as elements of product crises management in retailing.
Design/methodology/approach
– The advantages and disadvantages of these three elements of crises response strategies are juxtaposed drawing on relevant empirical research. For each element of crises response the major findings of research are summarized and shown how it relates to crisis management. Needs for further research that would be necessary to solidify recommendations to retail managers are derived.
Findings
– The investigation finds that both communicative and compensatory response elements as well as the retailer's logistics can positively influence evaluations of customers directly and indirectly affected by product problems thus enhancing brand equity. This in turn will serve to increase consumers' trust in the retailer that could win him new customers and generally benefit his reputation.
Research limitations/implications
– Most of the discussed research rests on the assumption of a given (extraneous) crisis response strategy of the manufacturer. Potential problems concerning the co‐ordination or implementation of manufacturer and retailer strategies remain open to question. Additionally, further research should examine which strategies are appropriate to which crisis situation.
Practical implications
– Materially, over‐compensating customers often has a detrimental effect on solving the crisis. The impact of different compensation types on crisis resolution mostly depends on their respective signalling capabilities, the product problem constituting the crisis and consumer attributions. The use and the effects of a communicative crisis response largely depend on moderating factors such as the retailer's reputation or the existence of strong retail brands and consumer expectations. Elements of logistics seem to support the effects of communication and compensation on crisis resolution but are hardly capable of solving a product‐harm crisis.
Originality/value
– The role of retailers in product‐harm crisis management has been widely neglected in research although such crises are predominant. This paper outlines the current empirical work on how different crises response elements may contribute to solving a product‐harm crisis for retailers. It derives relevant avenues for further research as well as useful insights to practitioners considering to using such response elements in their own crisis management strategy.
This research paper analyzes the role of pre-crisis
reputation for quality on consumers ’ perceptions of
product-related dangers and company responsibility
in product-harm crises with varying risk information.
We consider (non-) substantiated public
complaints incorporating low and moderate product-
related risks, as well as product-recall situations
involving serious risks to the health and safety of
consumers. Hypotheses are derived from theories
and concepts of consumer behavioural psychology.
These are then tested empirically by using an
online experiment. The effects of reputation are
analyzed across different crises contexts to derive
some general insights useful for crisis management.
In order to shed light on situational differences of
the reputation mechanism its effect on individual
crisis level will also be considered. In general, the
analysis fi nds that reputation for quality is capable
of positively infl uencing the perceptions of company
responsibility and thereby shielding the
manufacturer from receiving blame. However, an
established reputation for high product quality
prior to the crisis fails to positively impacting
consumers ’ perceptions of problem severity. The
crisis-specifi c effects of reputation turn out to be
ambivalent. On the basis of these fi ndings, recommendations
to crisis managers and relevant avenues
for future research are derived.
Adaptivity is prevalent in today’s software. Mobile devices
self-adapt to available network connections, washing machines
adapt to the amount of laundry, etc. Current approaches for engineering such systems facilitate the specification of adaptivity in the analysis and the technical design. However, the modeling of platform independent models for adaptivity in the logical design phase remains rather neglected causing a gap between the analysis and the technical design phase.
To overcome this situation, we propose an approach called Adapt Cases. Adapt Cases allow the explicit modeling of adaptivity with domain-specific means, enabling adaptivity to gather attention early in the software engineering process.
Since our approach is based on the concept of use cases it
is easy adoptable in new and even running projects that
use the UML as a specification language, and additionally,
can be easily incorporated into model-based development
environments.
Objective. To examine the association between region of origin and severe illness bringing a mother close to death (near‐miss). Design. Retrospective cohort study. Setting. Maternity units in Lower Saxony, Germany. Population. 441 199 mothers of singleton newborns in 2001–2007. Methods. Using chi‐squared tests, bivariate and multivariable logistic regression we examined the association between maternal region of origin and near‐miss outcomes with prospectively collected perinatal data up to seven days postpartum. Main outcome measures. Hysterectomy, hemorrhage, eclampsia and sepsis rates. Results. Eclampsia was not associated with region of origin. Compared to women from Germany, women from the Middle East (OR 2.24; 95%CI 1.60–3.12) and Africa/Latin America/other countries (OR 2.17; 95%CI 1.15–4.07) had higher risks of sepsis. Women from Asia (OR 3.37; 95%CI 1.66–6.83) and from Africa/Latin America/other countries had higher risks of hysterectomy (OR 2.65; 95%CI 1.36–5.17). Compared to German women, the risk of hemorrhage was higher among women from Asia (OR 1.55; 95%CI 1.19–2.01) and lower among women from the Middle East (OR 0.66, 95%CI 0.55–0.78). Adjusting for maternal age, parity, occupation, partner status, smoking, obesity, prenatal care, chronic conditions and infertility showed no association between country of origin and risk of sepsis. Conclusion. Region of origin was a strong predictor for near‐miss among women from the Middle East, Asia and Africa/Latin America/other countries. Confounders mostly did not explain the higher risks for maternal near‐miss in these groups of origin. Clinical studies and audits are required to examine the underlying causes for these risks.
Every culture has its paradise vision: desirable and external conditions which, inside the concerned culture, are infrequently observed or difficult to realize and are linked to one another. This cross-cultural study compares well-being inChina,Bulgaria,FranceandGermany. The cultural patterns of the culture are differently, but well-being is easier to achieve if people adapt to their cultural patterns. The adjustment (positive subjective culture) is formed by culture-specific content and needs different in regards to different cultures.
Detection and resolution of conflicting change operations in version management of process models
(2013)
Version management of process models requires that different versions of process models are integrated by applying change operations. Conflict detection between individually applied change operations and conflict resolution support are integral parts of version management. For conflict detection it is utterly important to compute a precise set of conflicts, since the minimization of the number of detected conflicts also reduces the overhead for merging different process model versions. As not every syntactic conflict leads to a conflict when taking into account model semantics, a computation of conflicts solely on the syntax leads to an unnecessary high number of conflicts. Moreover, even the set of precisely computed conflicts can be extensive and their resolution means a significant workload for a user. As a consequence, adequate support is required that guides a user through the resolution process and suggests possible resolution strategies for individual conflicts. In this paper, we introduce the notion of syntactic and semantic conflicts for change operations of process models. We provide a method how to efficiently compute conflicts precisely, using a term formalization of process models and consider the subsequent resolution of the detected conflicts based on different strategies. Using this approach, we can significantly reduce the number of overall conflicts and reduce the amount of work for the user when resolving conflicts.
Fairness and Team Efficiency
(2013)
This study applies to the perception of fairness during teamwork. Students were assigned to work groups by lot and were instructed to prepare a course presentation. Groups were given no guidelines relating to allocation of tasks, but each group was graded as a whole. Since a real grade was given in a non-simulated experiment, it was possible to determine team efficiency, work satisfaction, and perception of fairness via a subsequent study. Results show a strong influence of fairness on team efficiency.
Background
To offer vaginal birth after cesarean (VBAC) in a hospital setting is recommended in international guidelines, but offering VBAC in out‐of‐hospital settings is considered controversial. This study describes neonatal and maternal outcomes in mothers who started labor in German out‐of‐hospital settings.
Method
In a retrospective analysis of German out‐of‐hospital data from 2005 to 2011, included were 24,545 parae II with a singleton pregnancy in a cephalic presentation at term (1,927 with a prior cesarean and 22,618 with a prior vaginal birth).
Result
The overall VBAC rate was 77.8 percent. The intrapartum transfer rate to hospital was 38.3 percent (prior cesarean) versus 4.6 percent (prior vaginal) (p < 0.05), and the 10‐minute Apgar < 7 rate was 0.6 versus 0.2 percent (p < 0.05), and the nonemergency intrapartum transfer rate was 91.5 versus 85.0 percent (p < 0.05). Prolonged first stage of labor was the most common reason for intrapartum transfer in both groups. The leading reason for postpartum transfer was retained placenta.
Discussion
There was a high rate of successful VBAC in this study. The high nonemergency transfer rate for women with VBAC might mean that midwives are more cautious when attending women with a prior cesarean in out‐of‐hospital settings. Further studies are necessary to evaluate which women are suitable for VBAC in out‐of‐hospital settings.
The candidate list of substances subject to authorisation is an instrument provided by the EU chemicals regulation (REACH) to publicly announce and prioritize chemical substances of very high concern (SVHC) as a first step of imposing an obligation of authorisation on them, i.e. including them into the authorisation list (Annex XIV of REACH). As a consequence of inclusion into the “candidate list”, a variety of obligations concerned with intensifying risk communication apply. Article producers, importers and distributors of articles have to communicate information about SVHCs contained in articles and necessary risk management measures to the recipients of the articles and provide this information to consumers on request (Art. 33 REACH). This research paper analyzes the reputational mechanism of the candidate list showing a potential to stigmatize not only the substances as such but also various actors of the supply chain associated with these substances and their brands. Drawing on behavioral psychology theories, hypotheses on the reputational impacts of the candidate list on substance manufacturers, downstream users (including formulators and manufacturers of articles) and distributors are derived. These are discussed on the basis of current empirical data surveyed by the European Commission.
Background
The continuous rise in caesarean rates across most European countries raises multiple concerns. One factor in this development might be the type of care women receive during childbirth. ‘Supportive care during labour’ by midwives could be an important factor for reducing fear, tension and pain and decreasing caesarean rates. The presence and availability of midwives to support a woman in line with her needs are central aspects for ‘supportive care during labour’.
To date, there is no existing research on the influence of effective ‘supportive care’ by German midwives on the mode of birth. This study examines the association between the attendance and workload of midwives with the mode of birth outcomes in a population of low-risk women in a German multicentre sample.
Methods
The data are based on a prospective controlled multicentre trial (n = 1,238) in which the intervention ‘midwife-led care’ was introduced. Four German hospitals participated between 2007 and 2009.
Secondary analyses included a convenience sample of 999 low-risk women from the primary analyses who met the selection criterion ‘low-risk status’. Participation was voluntary. The association between the mode of birth and the key variables ‘attendance of midwives’ and ‘workload of midwives’ was assessed using backward logistic regression models.
Results
The overall rate of spontaneous delivery was 80.7% (n = 763). The ‘attendance of midwives’ and the ‘workload of midwives’ did not exhibit a significant association with the mode of birth. However, women who were not satisfied with the presence of midwives (OR: 2.45, 95% CI 1.54-3.95) or who did not receive supportive procedures by midwives (OR: 3.01, 95% CI 1.50-6.05) were significantly more likely to experience operative delivery or a caesarean. Further explanatory variables include the type of hospital, participation in childbirth preparation class, length of stay from admission to birth, oxytocin usage and parity.
Conclusion
Satisfaction with the presence of and supportive procedures by midwives are associated with the mode of birth. The presence and behaviour of midwives should suit the woman’s expectations and fulfil her needs. For reasons of causality, we would recommend experimental or quasi-experimental research that would exceed the explorative character of this study.
Atopic dermatitis, STAT3- and DOCK8-hyper-IgE syndromes differ in IgE-based sensitization pattern
(2014)
Background: We see a growing number of older adults receiving long-term care in industrialized countries. The Healthcare Utilization Model by Andersen suggests that individual need characteristics influence utilization. The purpose of this study is to analyze correlations between need characteristics and service utilization in home care arrangements.
Methods: 1,152 respondents answered the questionnaire regarding their integration of services in their current and future care arrangements. Care recipients with high long-term care needs answered the questionnaire on their own, the family caregiver assisted the care recipient in answering the questions, or the family caregiver responded to the questionnaire on behalf of the care recipient. They were asked to rank specific needs according to their situation. We used descriptive statistics and regression analysis.
Results: Respondents are widely informed about services. Nursing services and counseling are the most used services. Short-term care and guidance and training have a high potential for future use. Day care, self-help groups, and mobile services were the most frequently rejected services in our survey. Women use more services than men and with rising age utilization increases. Long waiting times and bad health of the primary caregiver increases the chance of integrating services into the home care arrangements.
Conclusion: The primary family caregiver has a high impact on service utilization. This indicates that the whole family should be approached when offering services. Professionals should react upon the specific needs of care dependents and their families.
This review gives an overview about the existing research concerning siblings' perspective within the familial experiences of childhood chronic illness. Besides attaining a conception of their world, it was intended to identify the unacknowledged issues concerning siblings' experience. Four databases were systematically searched. The analysis was concentrated on nine literature reviews. As a result, we identified a map of dimensions of experiences—well-elaborated as well as fragmentary. Many of the studies were conducted by a proxy and not from the sole siblings' perspective. Further research should concentrate on the sole siblings' perspective, in order to make siblings' voices audible.
Incidence of Tube Feeding in 7174 Newly Admitted Nursing Home Residents With and Without Dementias
(2015)
Background:
Tube feeding is a common form of long-term nutritional support, especially for nursing home residents, of whom many have dementia.
Objective:
Estimating the incidence of feeding tube placement in nursing home residents with and without dementia.
Methods:
Using claims data, we studied a cohort of newly admitted nursing home residents aged 65 years and older between 2004 and 2009. Analyses were stratified by dementia. We estimated incidence rates and performed multivariate Cox regression analyses.
Results:
The study cohort included 7174 nursing home residents. Over a mean follow-up of 1.3 years, 273 people received a feeding tube. The incidence per 1000 person-years was 28.4, with higher estimates for patients with dementia. When adjusting for age, sex, and level of care as a time-dependent covariate, influence of dementia decreased to a nonsignificant hazard ratio.
Conclusion:
It seems that not dementia itself but the overall clinical condition might be a predictor of tube feeding placement.
Mind the gap
(2015)
The study at hand focuses the interdependencies between stress incidents and strategies of stress-coping in relation with well-being in helping professions. Furthermore, the scarce areas and the proband’s strategies of health behavior, comparing helping and other vocational groups, are investigated. The sample consist of teachers, bank employees, employees of marketing agencies, employees coming from the machine construction industry, as well as nurses, psychotherapists and physicians. The results show that everyday annoyances and problem-oriented stress-coping indeed affect well-being.
The following article deals with equivalence as a specific quality criterion concerning cross cultural research in psychology and provides an overview for this topic. The comparability of constructs as well as of data is analyzed. For this, the different levels of equivalence are regarded, e.g., translation equivalence and others. Classical as well as modern methods for the testing and guarantee of equivalence are analyzed. Critical approaches and methodical problems of cross cultural research are described.
Report on visits in hospices located in Osnabrück/Germany and the Saint Cristopher’s Hospice in London/United
Kingdom; and present a discussion about the care mode. Methods: Experience report based on a post-doctoral research period
in Germany between November 2013 and October 2014, funded by the CAPES Foundation (Coordination for the Improvement of
Higher Education Personnel). Results: The structure, operation mode of the institutions and the main labor force were discussed,
especially the nursing staff and volunteers’ participation, the main care activities and challenges. These issues were very similar
at the hospices, highlighting the hospice responsible for spreading this moviment worldwide. Conclusion: The hospice may be
the place of death, but it provides a pleasant environment that preserves the person’s individuality and autonomy. It relies on the
participation of volunteers, dissemination of its idea and training programs, which ensure the strengthening of this movement.
Gender disparities in German home-care arrangements
An ageing population correlates with rising needs for
long-term care (LTC). Support programmes should con-
sider the specific needs of the various subgroups of care
dependents and family caregivers. The objective of this
study was to analyse the gender-specific disparities in
home-care arrangements in Germany, and for this pur-
pose, survey and insurance claims data were used. A sur-
vey of 2545 insured care recipients with high-level care
needs was conducted in 2012 with the Barmer GEK, a
major German statutory healthcare insurance. Insurance
claims data were provided for a follow-up, focussing on
the group aged 60 years and older. For statistical compar-
ison, chi-squared test and t-tests were used, and a p-
value < 0.05 was considered statistically significant. Most
care recipients are female, and they are on average
2 years older than males. Men receive family care mostly
from their wives, whereas widows frequently live alone
and receive care from daughters, sons, other relatives,
neighbours and friends, as well as from professional
nursing services. Furthermore, women more often antici-
pate the need for (further) professional assistance and
move in with a relative or to an assisted living facility or
a nursing home in good time. The desired rate for reloca-
tion to a nursing home was higher than the anticipated,
and during the 6-month follow-up, the actual rate of
relocations was in between both. In summary, the caring
situation of men and women is different. Care-receiving
men are most often cared for by their wives. Widowed
women need a social network and their children in order
to remain in their own home. To provide better home-
care arrangements for women in this situation, the fam-
ily and social networks need a stronger focus in politics
and research. To stabilise the home-care situation of men
with high-level care needs, their wives need more
support.
Objective: to understand the meaning of the Adult Intensive Care Unit environment of care,
experienced by professionals working in this unit, managers, patients, families and professional
support services, as well as build a theoretical model about the Adult Intensive Care Unit
environment of care. Method: Grounded Theory, both for the collection and for data analysis.
Based on theoretical sampling, we carried out 39 in-depth interviews semi-structured from
three different Adult Intensive Care Units. Results: built up the so-called substantive theory
“Sustaining life in the complex environment of care in the Intensive Care Unit”. It was bounded
by eight categories: “caring and continuously monitoring the patient” and “using appropriate
and differentiated technology” (causal conditions); “Providing a suitable environment” and
“having relatives with concern” (context); “Mediating facilities and difficulties” (intervenienting
conditions); “Organizing the environment and managing the dynamics of the unit” (strategy)
and “finding it difficult to accept and deal with death” (consequences). Conclusion: confirmed
the thesis that “the care environment in the Intensive Care Unit is a living environment, dynamic
and complex that sustains the life of her hospitalized patients”.
Objectives: to identify the errors in daily intensive nursing care and analyze them according to the theory of human error. Method: quantitative, descriptive and exploratory study, undertaken at the Intensive Care Center of a hospital in the Brazilian Sentinel Hospital Network. The participants were 36 professionals from the nursing team. The data were collected through semistructured interviews, observation and lexical analysis in the software ALCESTE®. Results: human error in nursing care can be related to the approach of the system, through active faults and latent conditions. The active faults are represented by the errors in medication administration and not raising the bedside rails. The latent conditions can be related to the communication difficulties in the multiprofessional team, lack of standards and institutional routines and absence of material resources. Conclusion: the errors identified interfere in nursing care and the clients’ recovery and can cause damage. Nevertheless, they are treated as common events inherent in daily practice. The need to acknowledge these events is emphasized, stimulating the safety culture at the institution.
The global climate system is currently warming due to the increase in CO2 emissions caused by humans. Technically oriented efficiency strategies are seen more frequently as solutions to reach the European Union’s maximum two degrees Celsius target. Companies play an important role in limiting climate change and must either prepare for such consequences or adopt new strategies such as the sufficiency strategy.
This article will discuss how the sufficiency strategy and the promotion of sufficient living in the context of the tourism industry can contribute to reducing CO2 emissions. Most common approaches toward sufficient living found in literature will be identified, analysed and discussed. Based on chosen keywords, the most common approaches were identified through a literature review of relevant journals from 1989 to 2014. Four main research fields that can promote sufficient living and reduce CO2 emissions were identified. Based on the prospects of the companies, it is apparent that sufficient strategies are not only able to support a market-orientated corporate management but also promote sufficient living and thus reduce CO2 emissions.
Our world and our lives are changing in many ways. Communication, networking, and computing technologies are among the most influential enablers that shape our lives today. Digital data and connected worlds of physical objects, people, and devices are rapidly changing the way we work, travel, socialize, and interact with our surroundings, and they have a profound impact on different domains,such as healthcare, environmental monitoring, urban systems, and control and management applications, among several other areas. Cities currently face an increasing demand for providing services that can have an impact on people’s everyday lives. The CityPulse framework supports smart city service creation by means of a distributed system for semantic discovery, data analytics, and interpretation of large-scale (near-)real-time Internet of Things data and social media data streams. To goal is to break away from silo
applications and enable cross-domain data integration. The CityPulse framework integrates multimodal, mixed quality, uncertain and incomplete data to create reliable, dependable information and continuously adapts data processing techniques to meet the quality of information requirements from end users. Different than existing solutions that mainly offer unified views of the data, the CityPulse framework is also equipped with powerful data analytics modules that perform intelligent data aggregation, event detection, quality
assessment, contextual filtering, and decision support. This paper presents the framework, describes ist components, and demonstrates how they interact to support easy development of custom-made applications for citizens. The benefits and the effectiveness of the framework are demonstrated in a use-case scenario
implementation presented in this paper.
The central objective of early prevention in Germany is an improved cooperation between professional groups of the health services and child and youth welfare in interprofessional networks. This objective derives from the realisation that proper care for families with infants can only be achieved if the various groups act in close integration. The ‘Federal Initiative early prevention’ explicitly calls for freelance midwives to be integrated in this context. However, only a few scientific findings on midwives’ cooperation in networks of early prevention have been published to date. This integrative review aims to identify the central themes of interprofessional cooperation of midwives in out-of-hospital obstetrical care from national and international research literature. A systematic search of five research databases for publications between 2005 and 2015 was performed, complemented by a manual search. 25 studies were identified describing various contexts where midwives in out-of-hospital obstetrical care cooperate with other professional groups. Four key themes were analysed: contexts of cooperation, benefits of cooperation, facilitating and restrictive factors of cooperation, and competencies of cooperation. The studies show that there is only limited research coverage of the midwives’ perspective regarding interprofessional cooperation. The existing studies examine the cooperation of midwives primarily with health care professionals, and secondarily with professionals in the social services. In order to expand knowledge on the cooperation of freelance midwives in the networks of early prevention, future research should focus on the perspective of midwives regarding cooperation with other professional groups, both in the health care sector and in the field of social services.
Social determinants of health that influence the healthy living process in a vulnerable community
(2016)
Introduction
Socioeconomic deprivation in high‐income industrialized countries is a key factor in poor perinatal outcomes. Limited access, utilization, and quality of antenatal care seem to play an important role in poor perinatal outcomes.
Methods
This integrative review aimed to explore experiences of antenatal care among women who are socioeconomically deprived in high‐income industrialized countries. A search was conducted using 5 databases for articles published from 2004 to 2014. Six qualitative and 3 quantitative articles were selected. These were systematically appraised for quality independently by 3 researchers. Relevant themes were identified and organized into categories.
Results
The disadvantages experienced in antenatal care by women who are socioeconomically deprived start before the first contact with health care services and are notable throughout the entire pregnancy. There is disparity in choice of medical or midwifery service provision models. Six categories emerged during review: choice of service provision model, feeling valued, various types of discrimination, structural and interpersonal accessibility, comprehensibility and trustworthiness of information, and engagement and sense of responsibility. Categories underscored the importance of the woman's relationship with the antenatal care provider.
Discussion
Antenatal care models with women‐centered approaches and continuity of care, such as midwifery models, have potential to increase the satisfaction of women with low socioeconomic status with care; this may increase antenatal care utilization and improve perinatal outcomes.
Aim: The aim of this study was to give an overview of family caregiver satisfaction within the home palliative care situation in North Rhine-Westphalia, Germany.
Design: A cross-sectional study.
Methods: An anonymous questionnaire, with seven validated scales, and comprising of 71 items, was used. The items investigated perceived needs and burdens of families within a home-based palliative care situation.
The satisfaction of the family caregivers with the services delivered by palliative care teams was measured by the FAMCARE-2 Scale. Descriptive statistics and analysis of covariance (ANCOVA) were performed.
Results: A convenience sample of 106 family members agreed to participate in the study. Overall, we found high satisfaction within our sample. There was high satisfaction with how the services respected the dignity of families, and how they provided comfort to patients. Satisfaction was lower with regard to information about patients.
Conclusion: High or low satisfaction with palliative care, tells us little about the quality of services. The high satisfaction within this study could be interpreted as a sign that palliative care was important to families at the time of availability. Regular and continuous assessment can serve to inform the continuous quality of care provision for patients and their families.
Still Searching or Have You Found It Already? – Usability and Web Design of an Educational Website
(2018)
Background: Apart from a straight-forward and intuitive operability an appealing design determines the success of a website equally well. For this reason, the selection of images and navigation bars plays a determining role. The eye tracking method proved to be appropriate in order to verify the usability of websites. Objectives: The aim of the study was to improve the usability of the website of an educational institute for trainees as target group. Methods/Approach: For this purpose, the use of an eye-tracking technology was combined with a survey. The eye-tracking study was implemented task-oriented. Test persons were asked to search for particular courses within this institute. Results: This approach in combination with a subsequent questionnaire resulted in tangible indications of search patterns of the test group. Furthermore, their perception and their appraisal of the usability as well as the web design was analysed. Even though most tasks were accomplished effectively and efficiently with a positive user feedback, a potential for improvement was detected, in particular with regard to the images and the location of the search field. Conclusions: The selected choice of methods enables researchers and web designers to derive recommendations for the orientation, structure, optimisation and comprehensibility of a website.
Biogas plants produce nutrient rich digestates as side products, which are usually used as local fertilisers. Yet the large amount and regional gradients of biogas plants in Germany necessitate management, conditioning, and transportation of digestates, in order to follow good fertilising procedure and prohibit local over-fertilisation. With a membrane-based treatment chain, i.e. centrifugation, ultrafiltration, and reverse osmosis, digestates can be separated into a solid N,P-fertiliser, a liquid N,K-fertiliser, and dischargeable water. Up to now, the high energy demand of the process chain, in particular the ultrafiltration step, limits the economical market launch of the treatment chain. A reduction of the energy demand is challenging, as digestates exhibit a high fouling potential and ultrafiltration fluxes differ considerably for digestates from different biogas plants. In a systematic screening of 28 digestate samples from agricultural biogas plants and 6 samples from bio-waste biogas plants, ultrafiltration performance could be successfully linked to the rheological properties of the digestate’s liquid phase and to its macromolecular biopolymer concentration. By modification of the fluid characteristics through enzymatic treatment, ultrafiltration performance was considerably increased by factor 2.8 on average, which equals energy savings in the ultrafiltration step of approximately 45%. Consequently, the energy demand of the total treatment chain decreases, which offers potential for further rollout of the membrane-based digestate treatment.
Background
Forced migration significantly endangers health. Women face numerous health risks, including sexual violence, lack of contraception, sexually transmitted disease, and adverse perinatal outcomes. Therefore, sexual and reproductive healthcare is a significant aspect of women asylum seekers’ health.
Even when healthcare costs of asylum seekers are covered by the government, there may be strong barriers to healthcare access and specific needs may be addressed inadequately. The study’s objectives were a) to assess the accommodation and healthcare services provided to women asylum seekers in standard and specialised health care, b) to assess the organisation of healthcare provision and how it addresses the sexual and reproductive healthcare needs of women asylum seekers.
Methods
The study utilised a multi-method approach, comprising a less-dominant quantitative component and dominant qualitative component. The quantitative component assessed accommodation conditions for women in eight asylum centres using a survey. The qualitative component assessed healthcare provision on-site, using semi-structured interviews with health and social care professionals (n = 9). Asylum centres were selected to cover a wide range of characteristics. Interview analysis was guided by thematic analysis.
Results
The accommodation in the asylum centres provided gender-separate rooms and sanitary infrastructure. Two models of healthcare were identified, which differed in the services they provided and in their organisation: 1) a standard healthcare model characterised by a lack of coordination between healthcare providers, unavailability of essential services such as interpreters, and fragmented healthcare, and 2) a specialised healthcare model specifically tailored to the needs of asylum-seekers. Its organisation is characterised by a network of closely collaborating health professionals. It provided essential services not present in the standard model. We recommend the specialised healthcare model as a guideline for best practise.
Conclusions
The standard, non-specialised healthcare model used in some regions in Switzerland does not fully meet the healthcare needs of women asylum seekers. Specialised healthcare services used in other regions, which include translation services as well as gender and culturally sensitive care, are better suited to address these needs. More widespread use of this model would contribute significantly toward protecting the sexual and reproductive integrity and health of women asylum seekers.
Making solar thermal systems less expensive, often results in a lower system efficiency. However, the cost-benefit ratio is relevant from the perspective of the consumer. The complex impact of component-related and system-related design parameters on the economics of a complete system makes the evaluation and economical optimization difficult.
Therefore, a complete simulation environment has been developed, which can automatically optimize solar-thermal systems,including collector and system parameters. The main collector module consists of a one-dimensional thermal model that was validated with a commercial solar collector. The efficiency curve and the production cost werecalculated as a function of several design and construction parameters. The collector module was linked to the commercial software Polysun®, so that parametric studies can be performed with minimaleffort. Optimization problems can be solved by using the Matlab® optimization toolbox.
The simulation environment wasused for sensitivity studies and optimization problems in order to analyze the impact of collector design-parameters with respect to system cost, system yield andeconomic values. We will demonstrate how a collector can be optimized and how the ideal system parameters like collector number and storage volume can be easily calculated. Finally, we will show how the optimizer is used for a given system in order to find ideal values for the absorber-sheet thickness and the number of pipes. Due to the holistic approach, the application of this tool set can be used for collector development as well as for system planning.
The deployment of containers as building modules has grown in popularity over the past years due to their inherent strength, modular construction, and relatively low cost. The upcycled container architecture is being accepted since it is more eco-friendly than using the traditional building materials with intensive carbon footprint. Moreover, owing to the unquestionable urgency of climate change, existing climate-adaptive design strategies may no longer respond effectively as they are supposed to work in the previous passive design. Therefore, this paper explores the conceptual design for an upcycled shipping container building, which is designed as a carbon-smart modular living solution to a single family house under three design scenarios, related to cold, temperate, and hot–humid climatic zones, respectively. The extra feature of future climate adaption has been added by assessing the projected future climate data with the ASHRAE Standard 55 and Current Handbook of Fundamentals Comfort Model. Compared with the conventional design, Rome would gradually face more failures in conventional climate-adaptive design measures in the coming 60 years, as the growing trends in both cooling and dehumidification demand. Consequently, the appropriate utilization of internal heat gains are proposed to be the most promising measure, followed by the measure of windows sun shading and passive solar direct gain by using low mass, in the upcoming future in Rome. Future climate projection further shows different results in Berlin and Stockholm, where the special attention is around the occasional overheating risk towards the design goal of future thermal comfort.
A recently published study of high temperature nitridation of iron chromium aluminum alloys (FeCrAl) at 900°C in N2–H2 has redundantly shown the formation of locally confined corrosion pockets reaching several microns into the alloy. These nitrided pockets form underneath chromia islands laterally surrounded by the otherwise protective alumina scale. Chromia renders a nitrogen‐permeable defect under the given conditions and the presence of aluminum in the alloy. In light of these findings on FeCrAl, a focused ion beam–scanning electron microscope tomography study has been undertaken on an equally nitrided FeNiCrAl sample to characterize its nitridation corrosion features chemically and morphologically. The alloy is strengthened by a high number of chromium carbide precipitates, which are also preferential chromia formation sites. Besides the confirmation of the complete encapsulation of the corrosion pocket from the alloy by a closed and dense aluminum nitride rim, very large voids have been found in the said pockets. Furthermore, metallic particles comprising nickel and iron are deposited on top of the outer oxide scale above such void regions.
Background
Lay family caregivers of patients receiving palliative care often confront stressful situations in the care of their loved ones. This is particularly true for families in the home-based palliative care settings, where the family caregivers are responsible for a substantial amount of the patient’s care. Yet, to our knowledge, no study to date has examined the family caregivers’ exposure to critical events and distress with home-based palliative care has been reported from Germany. Therefore, we attempt to assess family caregiver exposure to the dying patient’s critical health events and relate that to the caregiver’s own psychological distress to examine associations with general health within a home-based palliative care situation in Germany.
Methods
A cross-sectional study was conducted among 106 family caregivers with home-based palliative care in the Federal State of North Rhine Westphalia, Germany. We administered the Stressful Caregiving Adult Reactions to Experiences of Dying (SCARED) Scale. Descriptive statistics and linear regression models relating general health (SF-36) were used to analyze the data.
Results
The frequency of the caregiver’s exposure, or witness of, critical health events of the patient ranged from 95.2% “pain/discomfort” to 20.8% “family caregiver thought patient was dead”. The highest distress scores assessing fear and helpfulness were associated with “family caregiver felt patient had enough’” and “family caregiver thought patient was dead”. Linear regression analyses revealed significant inverse associations between SCARED critical health event exposure frequency (beta = .408, p = .025) and total score (beta = .377, p = .007) with general health in family caregivers.
Conclusions
Family caregivers with home-based palliative care in Germany frequently experience exposure to a large number of critical health events in caring for their family members who are terminally ill. These exposures are associated with the family caregiver’s degree of fear and helplessness and are associated with their worse general health. Thus the SCARED Scale, which is brief and easy to administer, appears able to identify these potentially upsetting critical health events among family caregivers of palliative care patients receiving care at home. Because it identified commonly encountered critical events in these patients and related them to adverse general health of family caregivers, the SCARED may add to clinically useful screens to identify family caregivers who may be struggling.
Niche-based species distribution models (SDMs) play a central role in studying species response to environmental change. Effective management and conservation plans for freshwater ecosystems require SDMs that accommodate hierarchical catchment ordering and provide clarity on the performance of such models across multiple scales. The scale-dependence components considered here are: (a) environment spatial structure, represented by hierarchical catchment ordering following the Strahler system; (b) analysis grain, that included 1st to 5th order catchments; and (c) response grain, the grain at which species respond most, represented by local and upstream catchment area effects. We used fish occurrence data from the Danube River Basin and various factors representing climate, land cover and anthropogenic pressures. Our results indicate that the choice of response grain – local vs. upstream area effects – and the choice of analysis grain, only marginally influence the performance of SDMs. Upstream effects tend to better predict fish distributions than corresponding local effects for anthropogenic and land cover factors, in particular for species sensitive to pollution. Key predictors and their relative importance are scale and species dependent. Consequently, choosing proper species dependent spatial scales and factors is imperative for effective river rehabilitation measures.
Injection of slurry or digestate below maize seeds is a relatively new technique developed to improve nitrogen use efficiency. However, this practice has the major drawback of increasing nitrous oxide (N2O) emissions. The application of a nitrification inhibitor (NI) is an effective method to reduce these emissions. To evaluate the effect of the NI 3,4‐dimethypyrazole phosphate (DMPP) on N2O emissions and the stabilization of ammonium, a two‐factorial soil‐column experiment was conducted. PVC pipes (20 cm diameter and 30 cm length) were used as incubation vessels for the soil‐columns. The trial consisted of four treatments in a randomized block design with four replications: slurry injection, slurry injection + DMPP, digestate injection, and digestate injection + DMPP. During the 47‐day incubation period, N2O fluxes were measured twice a week and cumulated by linear interpolation of the gas‐fluxes of consecutive measurement dates. After completion of the gas flux measurement, concentration of ammonium and nitrate within the soil‐columns was determined. DMPP delayed the conversion of ammonium within the manure injection zone significantly. This effect was considerably more pronounced in treatment digestate + NI than in treatment slurry + NI. Regarding the cumulated N2O emissions, no difference between slurry and digestate treatments was determined. DMPP reduced the release of N2O significantly. Transferring the results into practice, the use of DMPP is a promising way to reduce greenhouse gas emissions and nitrate leaching, following the injection of slurry or digestate.
The objective of this review is a global assessment of the economics of second‐generation biorefineries, with a focus on the use of food waste and agricultural residues for chemical production by applying biotechnological processes. Analyses are conducted on feedstock and product distribution, applied economic models, and profitability figures for the period 2013–2018. In a study of 163 articles on different biorefinery systems, the production of chemicals is identified as the second major product class, after bioenergy. Bagasse and straw are frequently analyzed second‐generation feedstocks. Based on the evaluation of 22 articles, second‐generation biorefineries producing chemicals by applying biotechnological processes proves to be economically feasible. On average, both the internal rate of return (IRR) and the return on investment (ROI) are 20% and the payback period (PP) is 6 years. The cost share of feedstock in biorefineries is between 0–50%. The price of the end product and the fermentation yields have the most impact on profitability. The processing of food waste that has industrial and municipal origins appears more economical than the processing of agricultural residues. Scientists, policy makers and entrepreneurs with an appropriate risk tolerance are advised to pay particular attention to municipal food waste and the potential economic production of carboxylic acids. For various economic issues related to biorefineries, dynamic‐deterministic models are recommended, which can be extended by a stochastic model. This review provides an initial overview of the economic feasibility of second‐generation biorefineries. Further techno‐economic analyses are required to produce statistically significant statements on key profitability figures. © 2020 The Authors. Biofuels, Bioproducts, and Biorefining published by Society of Chemical Industry and John Wiley & Sons, Ltd.
Various overoxidized poly(1H-pyrrole) (PPy), poly(N-methylpyrrole) (PMePy) or poly(3,4-ethylenedioxythiophene) (PEDOT) membranes incorporated into an acrylate-based solid polymer electrolyte matrix (SPE) were directly electrosynthesized by a two-step in situ procedure. The aim was to extend and improve fundamental properties of pure SPE materials. The polymer matrix is based on the cross-linking of glycerol propoxylate (1PO/OH) triacrylate (GPTA) with poly(ethylene glycol) diacrylate (PEGDA) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as a conducting salt. A self-standing and flexible polymer electrolyte film is formed during the UV-induced photopolymerization of the acrylate precursors, followed by an electrochemical polymerization of the conducting polymers to form a 3D-IPN. The electrical conductivity of the conducting polymer is destroyed by electrochemical overoxidation in order to convert the conducting polymer into an ion-exchange membrane by introduction of electron-rich groups onto polymer units. The resulting polymer films were characterized by scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, differential scanning calorimetry, thermal analysis and infrared spectroscopy. The results of this study show that the combination of a polyacrylate-matrix with ion selective properties of overoxidized CPs leads to new 3D materials with higher ionic conductivity than SPEs and separator or selective ion-exchange membrane properties with good stability by facile fabrication.
Background and Aims: Agronomic biofortification of food crops with iodine may improve the dietary intake of this trace element, which is essential for human development and health. So far, little is known about the suitability of this technique in pome fruits. The objectives of this study were (1) to investigate uptake and translocation of exogenously applied iodine in apple trees, (2) to identify possible strategies of iodine biofortification for this type of fruit, and (3) to evaluate interactions between foliar applied iodine and selenium.
Methods: Apple trees were cultivated in a plastic tunnel for two growing seasons. Iodine was applied via leaves or substrate. During the 2nd year, simultaneous foliar application of iodine and selenium were tested as well. At harvest time, iodine and selenium content in leaves and fruits were determined. The phytoavailable iodine concentration in the growing medium was analyzed following an extraction with calcium chloride. In addition, the dynamics of iodine applied as potassium iodide and iodate in a peat‐based substrate was investigated in an incubation experiment without plants.
Results: The iodine concentration in washed apples increased more than 100‐fold, valuing around 50 µg (100 g FM)−1 by foliar application of iodine as compared to the control treatment. However, this level was only achieved in fruits which were directly wetted by the spray solution. The translocation of leaf‐absorbed iodine to fruits was negligible. Following a substrate fertilization, the fruit iodine content remained rather low due to a strong retention of iodine in the growing medium. When using foliar sprays, the addition of selenium did not affect the iodine enrichment of the apple fruits.
Conclusions: Foliar fertilization of iodine seems to be a promising method to biofortify apples with iodine. The level of I achieved in apple fruits by means of foliar fertilization can significantly contribute to the daily I intake requirement of humans.
Organic pot-based production of basil (Ocimum basilicum L.) often has lower biomass yield than conventional cultivation. Previous investigations indicate that this growth impairment is related to high ammonium (NH4+) concentrations in the growing media released by the mineralization of organic nitrogen (N) fertilizers. However, as a result of this ammonification process substrate pH may also increase. Under neutral to alkaline conditions NH4+ is converted to ammonia (NH3), which is known to be phytotoxic even at low concentrations. Therefore, we investigated the impact of both ammonical N species on basil grown in a peat substrate. In total, three fertilization pot experiments were conducted in a greenhouse in order to compare the effect of different organic base dressings [250 and 750 mg N (L substrate)-1 mainly supplied by a liquid amino acid fertilizer (AAF)] and two initial substrate pH levels (5.5 and 6.5). In two treatments, 5% (v/v) mature compost was mixed into the peat 1 day and 12–days before the substrate was used for sowing, respectively. The aim of this procedure was to stimulate nitrification in this way to reduce ammonical N concentration. Ammonia concentration in the aerial plant surrounding environment was measured by using NH3 detector tubes in combination with an open-top chamber method. The results showed that the growth of basil (number of plants, fresh matter yield, plant height) was significantly inhibited in the second and third week of cultivation by rising NH3 and NH4+ exposure, as well as by a substrate pH ≥ 7.0. These adverse effects were reduced by lowering the organic base dressing rate and adjusting the initial substrate pH to 5.5. Furthermore, the addition of mature compost to peat in combination with a 12-day storage was proven to be effective for promoting nitrification in the organically fertilized substrate. As a result, plant growth was improved by both lower NH3 and NH4+ exposure as well as a faster supply of nitrate (NO3-) as an additional N source. Using this approach, it was possible to feed organically fertilized basil right from the seedling stage with a NO3--N/NH4+-N-balanced and later on providing a predominant NO3--N supply.
Background
Against the background of a steadily increasing degree of digitalization in health care, a professional information management (IM) is required to successfully plan, implement, and evaluate information technology (IT). At its core, IM has to ensure a high quality of health data and health information systems to support patient care.
Objectives
The goal of the present study was to define what constitutes professional IM as a construct as well as to propose a reliable and valid measurement instrument.
Methods
To develop and validate the construct of professionalism of information management (PIM) and itsmeasurement, a stepwise approach followed an established procedure from information systems and behavioral research. The procedure included an analysis of the pertaining literature and expert rounds on the construct and the
instrument, two consecutive and comprehensive surveys at the national and international level, exploratory and confirmatory factor analyses as well as reliability and validity testing.
Results
Professionalism of information management was developed as a construct consisting of the three dimensions of strategic, tactical, and operational IMas well as of the regularity and cyclical phases of IM procedures as the two elements of professionalism.
The PIM instrument operationalized the construct providing items that incorporated IM procedures along the three dimensions and cyclical phases. These procedures had to be evaluated against their degree of regularity in the instrument. The instrument proved to be reliable and valid in two consecutive measurement phases
and across three countries.
Conclusion
It can be concluded that professionalism of information management is a meaningful construct that can be operationalized in a scientifically rigorous manner. Both science and practice can benefit from these developments in terms of improved self-assessment, benchmarking capabilities, and eventually, obtaining a better understanding of health IT maturity.
Career Decisions of Indian Female Talent: Implications for Gender-sensitive Talent Management
(2020)
Purpose: Talent scarcity in emerging economies such as India poses challenges for companies,and limited labour market participation among well-educated women has been observed. The reasons that professionals decide not to pursue a further corporate career remain unclear. By investigating career decision making, this article aims to highlight (1) the contextual factors that impact those decisions, (2) individuals’ agency to handle them, and (3) the implications for talent management (TM).
Design/methodology/approach: Following a qualitative research design, computer-aided analysis was conducted on interviews with 24 internationally experienced Indian business professionals. A novel application of neo-institutionalism in the Indian context was combined with the family-relatedness of work decisions (FRWD) model.
Findings: Career decisions indicate that rebellion against Indian societal and family expectations is essential to following a career path, especially for women. TM as part of the current institutional framework serves as a legitimising façade veiling traditional practices that hinder females’ careers.
Research limitations: Interviewees adopted a retrospective perspective when describing their career decisions; therefore, different views might have existed at the moment of decision making.
Practical implications: Design and implementation of gender-sensitive TM adjusted to fit the specific Indian context can contribute to retaining female talent in companies and the labour market.
Originality/value: The importance of gender-sensitive TM can be concluded from an empirical study of the context-based career decision making of experienced business professionals from India. The synthesis of neo-institutionalism, the FRWD model and the research results provides assistance in mapping talent experiences and implications for overcoming the challenges of talent scarcity in India.
Vanadium carbide (VC) reinforced FeCrVC hardfacings have become important to improving the lifetime of tools suffering abrasive and impressive loads. This is because the microstructural properties of such hardfacings enable the primary VCs to act as obstacles against the penetrating abrasive. Because dilution is supposed to be the key issue influencing the precipitation behaviour of primary carbides during surfacing, the development of deposit welding processes exhibiting a reduced thermal impact, and hence lower dilution to the base material, is the primary focus of the current research. By inserting an additional hot wire in the melt, an approach was developed to separate the material and energy input during gas metal arc welding (GMAW) and hence realised low dilution claddings. The carbide content could be increased, and a grain refinement was observed compared with conventional GMAW. These effects could be attributed to both the reduced dilution and heterogeneous nucleation.
The effects of reaction parameters on Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0001 production from ethanol photocatalysis in the gas phase have been investigated. The photocatalytic activity evolves from an early mass‐transfer limited regime to an independent one at later irradiation times, which is interpreted in terms of a photocatalytic site activity distribution. Ethanol molar fraction exhibits two different domains, with Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0002 production increasing up to a molar fraction of 0.12, beyond which it plateaus. Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0003 :AcH ratios are very sensitive to reaction conditions, reaching 1.8 at low reactant flows. UV light is converted to Hurn:x-wiley:23670932:media:cptc202000216:cptc202000216-math-0004 with an efficiency of nearly 3 %.
Many people across the world suffer from iodine (I) deficiency and related diseases. The I content in plant-based foods is particularly low, but can be enhanced by agronomic biofortification. Therefore, in this study two field experiments were conducted under orchard conditions to assess the potential of I biofortification of apples and pears by foliar fertilization. Fruit trees were sprayed at various times during the growing season with solutions containing I in different concentrations and forms. In addition, tests were carried out to establish whether the effect of I sprays can be improved by co-application of potassium nitrate (KNO3) and sodium selenate (Na2SeO4). Iodine accumulation in apple and pear fruits was dose-dependent, with a stronger response to potassium iodide (KI) than potassium iodate (KIO3). In freshly harvested apple and pear fruits, 51% and 75% of the biofortified iodine was localized in the fruit peel, respectively. The remaining I was translocated into the fruit flesh, with a maximum of 3% reaching the core. Washing apples and pears with running deionized water reduced their I content by 14%. To achieve the targeted accumulation level of 50–100 μg I per 100 g fresh mass in washed and unpeeled fruits, foliar fertilization of 1.5 kg I per hectare and meter canopy height was required when KIO3 was applied. The addition of KNO3 and Na2SeO4 to I-containing spray solutions did not affect the I content in fruits. However, the application of KNO3 increased the total soluble solids content of the fruits by up to 1.0 °Brix compared to the control, and Na2SeO4 in the spray solution increased the fruit selenium (Se) content. Iodine sprays caused leaf necrosis, but without affecting the development and marketing quality of the fruits. Even after three months of cold storage, no adverse effects of I fertilization on general fruit characteristics were observed, however, I content of apples decreased by 20%.
Background:
Large health organizations often struggle to build complex health information technology (HIT) solutions and are faced with ever-growing pressure to continuously innovate their information systems. Limited research has been conducted that explores the relationship between organizations’ innovative capabilities and HIT quality in the sense of achieving high-quality support for patient care processes.
Objective:
The aim of this study is to explain how core constructs of organizational innovation capabilities are linked to HIT quality based on a conceptual sociotechnical model on innovation and quality of HIT, called the IQHIT model, to help determine how better information provision in health organizations can be achieved.
Methods:
We designed a survey to assess various domains of HIT quality, innovation capabilities of health organizations, and context variables and administered it to hospital chief information officers across Austria, Germany, and Switzerland. Data from 232 hospitals were used to empirically fit the model using partial least squares structural equation modeling to reveal associations and mediating and moderating effects.
Results:
The resulting empirical IQHIT model reveals several associations between the analyzed constructs, which can be summarized in 2 main insights. First, it illustrates the linkage between the constructs measuring HIT quality by showing that the professionalism of information management explains the degree of HIT workflow support (R²=0.56), which in turn explains the perceived HIT quality (R²=0.53). Second, the model shows that HIT quality was positively influenced by innovation capabilities related to the top management team, the information technology department, and the organization at large. The assessment of the model’s statistical quality criteria indicated valid model specifications, including sufficient convergent and discriminant validity for measuring the latent constructs that underlie the measures of HIT quality and innovation capabilities.
Conclusions:
The proposed sociotechnical IQHIT model points to the key role of professional information management for HIT workflow support in patient care and perceived HIT quality from the viewpoint of hospital chief information officers. Furthermore, it highlights that organizational innovation capabilities, particularly with respect to the top management team, facilitate HIT quality and suggests that health organizations establish this link by applying professional information management practices. The model may serve to stimulate further scientific work in the field of HIT adoption and diffusion and to provide practical guidance to managers, policy makers, and educators on how to achieve better patient care using HIT.
Abstract: Thermal response curves that depict the probability of occurrence along a thermal gradient are used to derive various species’ thermal properties and abilities to cope with warming. However, different thermal responses can be expected for different portions of a species range. We focus on differences in thermal response curves (TRCs) and thermal niche requirements for four freshwater fishes (Coregonus sardinella, Pungitius pungitius, Rutilus rutilus, Salvelinus alpinus) native to Europe at (1) the global and (2) European continental scale. European ranges captured only a portion of the global thermal range with major differences in the minimum (Tmin), maximum (Tmax) and average temperature (Tav) of the respective distributions. Further investigations of the model-derived preferred temperature (Tpref), warming tolerance (WT = Tmax − Tpref), safety margin (SM = Tpref − Tav) and the future climatic impact showed substantially differing results. All considered thermal properties either were under- or overestimated at the European level. Our results highlight that, although continental analyses have an impressive spatial extent, they might deliver misleading estimates of species thermal niches and future climate change impacts, if they do not cover the full species ranges. Studies and management actions should therefore favor whole global range distribution data for analyzing species responses to environmental gradients.
Social networking technologies such as social media, crowd concepts, or gamification represent key resources for the integration of customers, value network partners, and the community into sustainable business models. However, there is a lack of understanding of how sustainable enterprises apply such technologies. To close this gap, we propose a taxonomy of design options for social networking technologies in sustainable business models. Our taxonomy comprises eight dimensions that deal with relevant questions of the design of social networking technologies. When creating our taxonomy, we built on existing literature and use cases and involved experienced practitioners in the field of sustainable business models for the validation of our taxonomy. In this way, our study contributes to knowledge on the use of social networking technologies in sustainable business models and how such technologies influence the boundaries of sustainable business models. Likewise, we provide practical insights into the use of social networking technologies in sustainable business models.