Refine
Document Type
- Article (8) (remove)
Has Fulltext
- no (8) (remove)
Is part of the Bibliography
- yes (8)
Keywords
- Delphi-Studie (1)
- Dokumentation (1)
- FIB-SEM tomography (1)
- FeNiCrAl (1)
- Future Skills (1)
- Inverted Classroom (1)
- Open Source (1)
- Physiotherapie (1)
- Scrum (1)
- Software (1)
Institute
- Fakultät IuI (8) (remove)
Biogas plants produce nutrient rich digestates as side products, which are usually used as local fertilisers. Yet the large amount and regional gradients of biogas plants in Germany necessitate management, conditioning, and transportation of digestates, in order to follow good fertilising procedure and prohibit local over-fertilisation. With a membrane-based treatment chain, i.e. centrifugation, ultrafiltration, and reverse osmosis, digestates can be separated into a solid N,P-fertiliser, a liquid N,K-fertiliser, and dischargeable water. Up to now, the high energy demand of the process chain, in particular the ultrafiltration step, limits the economical market launch of the treatment chain. A reduction of the energy demand is challenging, as digestates exhibit a high fouling potential and ultrafiltration fluxes differ considerably for digestates from different biogas plants. In a systematic screening of 28 digestate samples from agricultural biogas plants and 6 samples from bio-waste biogas plants, ultrafiltration performance could be successfully linked to the rheological properties of the digestate’s liquid phase and to its macromolecular biopolymer concentration. By modification of the fluid characteristics through enzymatic treatment, ultrafiltration performance was considerably increased by factor 2.8 on average, which equals energy savings in the ultrafiltration step of approximately 45%. Consequently, the energy demand of the total treatment chain decreases, which offers potential for further rollout of the membrane-based digestate treatment.
A recently published study of high temperature nitridation of iron chromium aluminum alloys (FeCrAl) at 900°C in N2–H2 has redundantly shown the formation of locally confined corrosion pockets reaching several microns into the alloy. These nitrided pockets form underneath chromia islands laterally surrounded by the otherwise protective alumina scale. Chromia renders a nitrogen‐permeable defect under the given conditions and the presence of aluminum in the alloy. In light of these findings on FeCrAl, a focused ion beam–scanning electron microscope tomography study has been undertaken on an equally nitrided FeNiCrAl sample to characterize its nitridation corrosion features chemically and morphologically. The alloy is strengthened by a high number of chromium carbide precipitates, which are also preferential chromia formation sites. Besides the confirmation of the complete encapsulation of the corrosion pocket from the alloy by a closed and dense aluminum nitride rim, very large voids have been found in the said pockets. Furthermore, metallic particles comprising nickel and iron are deposited on top of the outer oxide scale above such void regions.
Various overoxidized poly(1H-pyrrole) (PPy), poly(N-methylpyrrole) (PMePy) or poly(3,4-ethylenedioxythiophene) (PEDOT) membranes incorporated into an acrylate-based solid polymer electrolyte matrix (SPE) were directly electrosynthesized by a two-step in situ procedure. The aim was to extend and improve fundamental properties of pure SPE materials. The polymer matrix is based on the cross-linking of glycerol propoxylate (1PO/OH) triacrylate (GPTA) with poly(ethylene glycol) diacrylate (PEGDA) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as a conducting salt. A self-standing and flexible polymer electrolyte film is formed during the UV-induced photopolymerization of the acrylate precursors, followed by an electrochemical polymerization of the conducting polymers to form a 3D-IPN. The electrical conductivity of the conducting polymer is destroyed by electrochemical overoxidation in order to convert the conducting polymer into an ion-exchange membrane by introduction of electron-rich groups onto polymer units. The resulting polymer films were characterized by scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, differential scanning calorimetry, thermal analysis and infrared spectroscopy. The results of this study show that the combination of a polyacrylate-matrix with ion selective properties of overoxidized CPs leads to new 3D materials with higher ionic conductivity than SPEs and separator or selective ion-exchange membrane properties with good stability by facile fabrication.
The objective of this review is a global assessment of the economics of second‐generation biorefineries, with a focus on the use of food waste and agricultural residues for chemical production by applying biotechnological processes. Analyses are conducted on feedstock and product distribution, applied economic models, and profitability figures for the period 2013–2018. In a study of 163 articles on different biorefinery systems, the production of chemicals is identified as the second major product class, after bioenergy. Bagasse and straw are frequently analyzed second‐generation feedstocks. Based on the evaluation of 22 articles, second‐generation biorefineries producing chemicals by applying biotechnological processes proves to be economically feasible. On average, both the internal rate of return (IRR) and the return on investment (ROI) are 20% and the payback period (PP) is 6 years. The cost share of feedstock in biorefineries is between 0–50%. The price of the end product and the fermentation yields have the most impact on profitability. The processing of food waste that has industrial and municipal origins appears more economical than the processing of agricultural residues. Scientists, policy makers and entrepreneurs with an appropriate risk tolerance are advised to pay particular attention to municipal food waste and the potential economic production of carboxylic acids. For various economic issues related to biorefineries, dynamic‐deterministic models are recommended, which can be extended by a stochastic model. This review provides an initial overview of the economic feasibility of second‐generation biorefineries. Further techno‐economic analyses are required to produce statistically significant statements on key profitability figures. © 2020 The Authors. Biofuels, Bioproducts, and Biorefining published by Society of Chemical Industry and John Wiley & Sons, Ltd.
Hintergrund Die physiotherapeutische Dokumentation spielt im Therapieprozess eine wichtige Rolle, erfolgt jedoch auf unterschiedlichste Weise. Es existieren derzeit eine Vielzahl von Softwarelösungen für die physiotherapeutische Dokumentation, welche sich jedoch in ihren Funktionalitäten stark unterscheiden. Ziel Mithilfe einer Befragung soll ein Konsens von Expertenaus der Physiotherapie im Themengebiet der softwarebasierten Dokumentation ermittelt werden. Anhand der Ergebnisse wird ein Anforderungskatalog für die Entwicklung einer neuartigen und benutzerorientierten Dokumentationssoftware erstellt. Methode Online-Delphi-Befragung mit neun Experten über drei Befragungswellen.
Ergebnisse Hinsichtlich der Anforderungen an die Anamnese konnte ein Konsens erzielt werden. Bei der Gliederung des Befundes kam es zu keiner Übereinstimmung der Experten. Das Ergebnis lässt sich durch unterschiedliche manualtherapeutische Konzepte erklären, die für die Befunderhebung verwendet wurden. Schlussfolgerung Eine softwarebasierte Dokumentation sollte standardisierter als bisher erfolgen, um den ClinicalReasoning-Prozess zu unterstützten. Gleichzeitig ist dabei eine gewisse Flexibilität geboten. Die gesammelten Anforderungen können für die Entwicklung einer neuartigen und benutzerorientierten mobilen Anwendung zur Effizienzsteigerung in der physiotherapeutischen Dokumentation verwendet werden.
The effects of reaction parameters on Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0001 production from ethanol photocatalysis in the gas phase have been investigated. The photocatalytic activity evolves from an early mass‐transfer limited regime to an independent one at later irradiation times, which is interpreted in terms of a photocatalytic site activity distribution. Ethanol molar fraction exhibits two different domains, with Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0002 production increasing up to a molar fraction of 0.12, beyond which it plateaus. Hurn:xwiley:23670932:media:cptc202000216:cptc202000216-math-0003 :AcH ratios are very sensitive to reaction conditions, reaching 1.8 at low reactant flows. UV light is converted to Hurn:x-wiley:23670932:media:cptc202000216:cptc202000216-math-0004 with an efficiency of nearly 3 %.
Die Anforderungen an zukünftige Teilnehmende eines Arbeitsmarktes verändern sich. Das von Frithjof Bergmann begründete Prinzip der Neuen Arbeit (Bergmann, 2004) ist aktuell Gegenstand zahlreicher Diskussionen und Debatten über aktuelle und zukünftige Arbeitswelten. Die sich daraus ergebenden Kompetenzanforderungen passen mit der Lehre in Hochschulen wenig zusammen. Zunehmend werden agile Lernszenarien diskutiert.
Das Inverted Classroom Modell (ICM) erfreut sich seit einigen Jahren großer Beliebtheit in der Hochschullehre. Aus Studierendensicht ist die Teilnahme an einer ICM-Veranstaltung aber eine Herausforderung. Für ein erfolgreiches Lernen sind insbesondere personale Kompetenzen wie Selbstmotivation, Durchhaltevermögen und Selbstregulationskompetenz erforderlich (Pöpel & Morisse, 2019). Um diesem Umstand entgegenzuwirken, wurde vom Autor ICM mit Ideen aus Scrum für eine Informatik-Lehrveranstaltung kombiniert (siehe auch (Morisse & Heidemann, 2021)). Die Wirkung von Scrum kann sich nur entfalten, wenn die Arbeit in einzelne Sprints aufgeteilt wird und bei der Bearbeitung der Sprints auch die eigene Zusammenarbeit im Rahmen einer Retrospektive kritisch reflektiert wird. Zu diesem Zweck wird der gesamte Inhalt der Lehrveranstaltung in eine Anzahl von thematischen Blöcken aufgeteilt, die als Lehr- und Lerninhalte für die Lern-Sprints der Scrum-Umsetzung werden. Für jeden Themenblock müssen die theoretischen Inhalte erarbeitet sowie eine eigenständige Zusammenfassung formuliert werden. Ergänzend dazu wurde ein Software-Produkt definiert, in dessen Rahmen die theoretischen Inhalte einfließen konnten.
Die Durchführung eines Reviews und einer Retrospektive schließen bei Scrum einen Sprint ab. Genau dies lässt sich auch im Hochschulkontext sehr gut als Feedback-Instrument durchführen. Das Review bestand in der Inspektion der entwickelten Software. Mit der Retrospektive wird die eigene Zusammenarbeit im Team kritisch reflektiert. Ein besonderes Augenmerk verdient der kommunikative Stil zwischen Lehrenden und Studierenden. Bei einem Veranstaltungskonzept, welches getragen wird von Interaktion und Diskussion, kommt einer empathischen und wertschätzenden Kommunikation eine besondere Bedeutung zu. Das dies in der vorgestellten Veranstaltung scheinbar gelungen ist, zeigt das Zitat eines der teilnehmenden Studierenden „Ich freue mich immer auf die Review-Termine“. Zur Erinnerung: Das Review ist der Termin zur Vorstellung des erreichten Ergebnisses, also eher ein Prüfungs-Setting, bei dem Studierende ihre Arbeit präsentieren. Weitere positive Resonanzmerkmale durch die Studierenden waren die hoffnungsvollen Fragen, ob denn die Veranstaltungen im kommenden Semester auch nach ICMScrum organisiert sind.
Die Maschine ist in der Lage faserverstärkte thermoplastische Kunststoffrohre herzustellen. Entwickelt und konstruiert wurde die Maschine als Open Source Hardware Projekt. Das bedeutet die Baupläne und Zeichnungen werden frei zur Verfügung gestellt. Heimwerker und andere Interessierte sollen dadurch die Möglichkeit bekommen faserverstärkte Rohre eigenständig und günstig herzustellen. Die Entwicklung und Konstruktion der Wickelmaschine ist das Ergebnis einer Masterarbeit an der Hochschule Osnabrück.